Skip to main content

PerkinElmer QSight® LC/MS/MS System

When analyzing food, and environmental samples, laboratories need multiple system to get the qualitative and quantitative information on contaminants, resulting in duplicated sample preparation processes, increased cost of ownership and sub-optimal lab efficiency. The unique dual-source configuration of the PerkinElmer QSight® LC/MS/MS System enables high-throughput labs to collect data in two complementary modes (ESI and APCI), maximizing the output from a single injection. Combined with the StayClean technology, source cleaning and maintenance is dramatically reduced, translating into higher productivity and ROI. The easy-to-learn PerkinElmer Simplicity 3Q Software, streamlines the complete LC/MS/MS workflow, from validated method development to data reporting.

Exploit the productivity for your lab with the QSight LC/MS/MS System.

 

 

 
  • 19,100matrix injections, still running
  • EPA 1633consumables verified to method
  • Directinjection, minimal sample prep
  • StayClean™HSID interface
 
Cypress-512.jpg

Introducing the QSight 500 LC/MS/MS System

Built for sludge, grease, and the nastiest matrices you can throw its way. With unmatched robustness and minimal sample prep, the QSight® 500 LC/MS/MS System transforms even the most challenging samples into clean, reliable, and actionable data. Powered by StayClean™ Technology, the QSight® 500 LC/MS/MS System has greater resilience to internal contamination, allowing simplified sample prep and reducing downtime so you can optimize resources and maximize lab throughput. Learn More

Learn More

 

 

Uptime

Gain more days of uptime

Matrix-induced contamination causes sensitivity loss, which means cleaning, which means downtime. The question for a high-throughput lab isn't how a system performs on its first injection — it's how many dirty injections it survives before it stops.

In a continuous matrix-injection study, the QSight 500 was still producing stable, normalised peak areas after 19,100 injections, at which point the analysis was still running. Two competitor systems in the same study had already stopped.

Choose robustness and uptime over unused features and unscheduled downtime.

Matrix injections completed before sensitivity loss

Continuous matrix-injection robustness study

Matrix injections completed before sensitivity loss Competitor System 1 stopped at approximately 3,400 injections. Competitor System 2 stopped at approximately 7,100 injections. The PerkinElmer QSight 500 reached 19,100 injections and was still running. Competitor System 1 — stopped at approx. 3,400 injections Competitor System 1 ~3,400 Competitor System 2 — stopped at approx. 7,100 injections Competitor System 2 ~7,100 PerkinElmer QSight 500 — 19,100 injections and still running PerkinElmer QSight 500 19,100 · still running 0 5,000 10,000 15,000 20,000 Matrix injections

QSight 500 figure as of publication, February 2025 — analysis still running, so the bar is open-ended. Competitor endpoints are read from the study chart published in the QSight 500 brochure, which marks where each system stopped without printing exact values. On these figures the QSight 500 ran 2.7× longer than the longer-lasting competitor.

View data
SystemInjections
Competitor System 1~3,400
Competitor System 2~7,100
PerkinElmer QSight 50019,100+
 

Less Sample Prep. More Productivity

Tackle the toughest food matrices with minimal sample preparation and maximum efficiency. Whether dealing with fatty avocados or aqueous tomatoes, Blend & Inject transforms complex samples into clean, reliable, and actionable data—without the need for extensive extraction or cleanup.

Designed to work seamlessly with the PerkinElmer QSight 500 LC/MS/MS, this streamlined approach enhances throughput while maintaining sensitivity at levels far below the regulatory limits. Comparable results to QuEChERS, but with a fraction of the prep time. With the robustness of QSight StayClean Technology, Blend & Inject minimizes downtime, optimizes resources, and keeps your lab running smoothly.

StayClean HSID Interface: cleaner, more reliable performance

Unlike traditional systems that accumulate contamination over time, a heated inner surface prevents buildup, while a hot laminar flow ensures efficient desolvation of charged species. That means enhanced ion transmission, greater signal stability and long-term reliability — so you can focus on your work, not on cleaning.

  • Reduced contamination for cleaner data
  • Consistent, reproducible results over time
  • Less maintenance and downtime
 
  • 19,100+matrix injections without sensitivity lossFebruary 2025, analysis ongoing
  • Extendedmaintenance intervals versus traditional interfaces
  • Stablenormalised peak areas across the full study
 
 

Request a Demo, Quote or More Information

Get in Touch