1-25 of 61 Products & Services
The Hayman Micro Spatula is a 6.25 in long double-ended spatula with a 1.25 in (L) x 0.125 in (W) spatula on one end and a 0.5 in (L) x 0.125 in (W) spoon-like end on the other end. This nickel-plated stainless steel spatula is designed for handling microliter-sized solid sample volumes or smaller. Qty. 1
The Valve Plunger Spring sits insided the Valve Plunger and is a replacement part for the Normally Closed Valve assembly in the EA 2400 Elemental Analyzer. It can be replaced without the assistance of a PKI service representative. With this part number, this spring can be ordered as a replacement or spare part.
For use with crossover fitting bracket assembly (N2410315) and bottom end of scrubber tube (N2411359).
The Valve O-Ring sits at the base of the Normally Open and Normally Closed Valve assemblies found in EA 2400 Elemental Analyzers. With this part number, the O-Ring can be ordered separately as a replacement or spare part.
The Solid Sample Handling Kit supplies tools designed to manipulate samples to be analyzed using the 2400 CHNS/O Elemental Analyzer.
The Sample Capsule is made of aluminum and has a volume of 4 µL. Volatile liquids are placed inside a hermetically-sealed aluminum capsules to prevent the loss of sample. Then, the aluminum capsule is placed inside a standard tin capsule for analysis. Qty. 1000.
This capsule requires, but does not include, the Liquid Sample Sealer and Tin Capsules.
Used to open the Normally Open and Normally Closed Valves on EA 2400 Elemental Analyzers.
The Single Quill Brush is a component of the Solid Sample Handling Kit (N2410146). With this part number, you can order it separately to replenish your supplies. Qty. 12
The Glass Tube Nut is a hexagonally-shaped brass fitting, 11 mm across. This part can be ordered as a replacement or spare part for the EA 2400 Plate Accessory Injector MTG or the Alpha Furnace MTG Fitting Accessory.
The Combustion Tube Wrench is an 25 mm wrench made of aluminum. It is used to maintain PerkinElmer's Elemental Analyzer. It is also available as an 11 mm wrench.
CHN Analysis Kit
For automatic determination of carbon, hydrogen, and nitrogen in organic substances.
Add this optional kit to simultaneously determine CHN with your PerkinElmer 2400 Series II Analyzer.
The Viton Valve O-Ring Adapter, also known as the Skinner O-Ring, is a replacement part for the Normally Open Valve assembly. This O-Ring has an inner diameter of 0.421 in and is 0.139 in wide. It ships with the 2400 CHN Maintenance Kit (N2410152).
Maintenance of the Normally Open Valve assembly requires a PerkinElmer Service Engineer.
The Sample Pedestal is an aluminum pedestal with an outer diameter of 0.375 in and an inner diameter of 0.225 in. It is compatible with the 2400 Series II analyzer and can hold one sample capsule.
The Ceramic Combustion Tube Ring, 25 mm, sits between the Glass Tube Nut and the CHNS/O Combustion Tube connector in EA Analyzers. With this part number, this part can be ordered as a replacement or spare. Qty. 1
The Liquid Sample Sealer is used to seal volatile, non-viscous, non-corrosive samples. This sealer comes with a capsule magazine (B0501078) and an instruction manual.
The Silver Capsule is made from 99% pure silver. It is used when analyzing organic substances for oxygen content. Qty. 96
1-2 of 2 Resource Library