Autosampler Supplies

The stirrer block is a component in the sample homogenization process for the ASX-1400 and ASX-1600 autosamplers.

The rinse station is required for proper cleaning of autosampler components.

The 3-Way Valve Assembly is used with the XLP-300 Syringe for the APS-1650.

The stirrer block is a component in the sample homogenization process for the ASX-1400 and ASX-1600 autosamplers.

This Rinse/Drain Tubing Hookup Kit, for aqueous applications, contains rinse/drain Tygon^® tubing for the XLR-860.

Stirring rod, 6.5 inches in length, for the ASX-1400 and ASX-1600.

prepFAST dilution tee, PFA, 0. 25 mm, XL port 7 nut.

This Rinse/Drain Tubing Hookup Kit, for aqueous solutions, contains rinse/drain FEP-lined Tygon^® tubing for the ASX-280 and ASX-560.

Our Non HF-Resistant Internal Standard Kit includes: HF Mixing T-piece, Internal Standard Sample Probe 0.25 mm ID, EzyFit Sample Tube 0.5 mm ID, EzyFit with 1/16 inch OD x 0.50 mm ID x 700 mm Long Sample Tube, EzyFit Internal Standard Tube 0.25 mm ID, Vitex^® Gripper Paper - Qty. 6, Orange-Blue Flared End PVC Tubing 0.25 mm ID – Qty. 12.

Tubing Connection Kit for the ENC-560 Anti-Contamination Enclosure.

These freestanding 12 mL graduated PFA flat bottom tubes have dimensions 16 mm outer diameter by 110 mm height.

The Passive Bubbling Tee contains a bubbling tee, fittings, and tubing for the ASXPRESS^® PLUS.

Carrier/Diluent Reservoir (1) and Internal Standard Reservoir (1), 2 L each, with luer connectors and caps, precleaned.

High-purity valve stators and rotors provide a liquid path with low contamination and low carryover for the best ICPMS results.CTFE stators offers high impact strength, chemical and corrosion resistance over a wide temperature range — typically -76°C to +150°C (-105°F to +300°F).

High purity valve stators and rotors provide a liquid path with low contamination and low carryover for the best ICP results. PTFE rotors offer the cleanest, most chemically-resistant flow path. PEEK/PTFE composite rotors offer excellent chemical resistance and longer lifetimes than PTFE rotors.

PerkinElmer offers a complete selection of self-aspirating probes for NexION^® 2000 ICP-MS series instruments.

Heavy-duty construction prevents cracking or tipping. Conical design allows for use of entire sample. Clear, recommended for use with most aqueous solutions. For use with PerkinElmer AS-60/70/71/72/800 Graphite Furnace Autosampler.

Non-PFA sample vessels manufactured from plastics, such as polypropylene, polyethylene and polystyrene, are a sensible alternative to consider when breakage, surface inertness and/or disposal costs are concerns.

prepFAST line valve assembly, including V9 valve, P7 valve, and four line assemblies: syringe, V9 inlet, V9 outlet and P7.

Length: 1m, Inner Diameter: 0.6mm, Two Fittings

These PFA screw caps are for use with 30 mm outer diameter vials.

This 6-Port Valve, designed for use with oils applications, is for the AXPRESS^® PLUS.

0.5mm i.d. (orange) FAST connector for Miramist Nebulizer. Attaches to port #3 of the FAST valve.

Bottle, Polypropylene (500 mL), with ¼-28 fitting and filtered air inlet. Includes cap with hole drilled for probe (73 x 180 mm), no label.

PerformR^® centrifuge tubes, 29 mm x 115 mm, with teal flat caps, combine reliable performance in major centrifuges. Spin rates higher than most popular brands. And high quality lab certified non cyto-toxic medical grade resin.

The 6-Port Valve Coupler is a component replaced in the ASXPRESS^® PLUS Valve/Pump Module (N0777857).

The HF-Resistant Internal Standard Kit includes: HF Mixing T-piece, Internal Standard Sample Probe 0.25 mm ID, EzyFit Sample Tube 0.5 mm ID, EzyFit with 1/16 inch OD x 0.50 mm ID x 700 mm Long Sample Tube, EzyFit Internal Standard Tube 0.25 mm ID, Vitex® Gripper Paper - Qty. 6, Orange-Blue Flared End PVC Tubing 0.25 mm ID – Qty. 12

The Tygon^® Tubing kit contains 3.05 m (10 ft) of Tygon^® tubing with various inner diameters for various applications for the ASXPRESS^® PLUS.

Dual 500 mL polypropylene bottle kit with ¼-28 fittings with 0.5 mm (Orange) internal lines and filtered air inlets. Labeled Carrier/Blank and Working solution.

V9 PFA rotor for 9 port prepFAST valve. Bore Size: 1. 0 mm# of ports: 9

PerkinElmer offers a complete selection of self-aspirating probes for NexION^® 2000 ICP-MS series instruments.

CTFE stator, PTFE rotor, 0.8 mm High purity valve stators and rotors provide a liquid path with low contamination and low carryover for the best ICP results.

Translucent polypropylene tubes, 13 mm x 100 mm, are designed to provide excellent chemical resistance.

Polyurethane tubing, 130 inches in length, for the APS-1650.

Sampling Probe with Screw Fitting for PerkinElmer AS-90/90A/90 Plus/91/93 Plus Autosampler, Requires but does not include capillary tubing assembly (P/N B3000157, B3000158, or B0191060).

This tubing kit is designed for the rinse pump module component of the APS-1650.

0. 25mm i. d. DXi internal standard tee (PFA, green marker) Attaches to port #3 (DXi Version). Specially designed mixing tee is perfect for online addition of internal standard or online dilution. Achieves excellent mixing with minimal dead volume. 0. 5 mm i. d. capillary is recommended for applications with fl ow rates> 0. 3 mL/min.

These pre-cleaned PFA caps are used with 14 mm outer diameter PFA or PTFE vials.

These 15 mL graduated PFA vials have an outer diameter of 30 mm.

Fluoropolymer peristaltic pump union, Barbed, Small Female threads, used in high pressure applications (qty. 1)

Internal standard probe, with 0.5 mm inner diameter and orange marker, with Carbon Fiber support for NexION^® 2000 and 1000 ICP-MS instrument series. Includes fluoropolymer micro fitting.