The efficient and accurate analysis of natural gas, liquids and pressurized liquids, and the calculation of its physical properties are of critical importance to ensuring safety and quality during the production and transport of natural gasses. Owing to the varied and substantial nature of both organic and inorganic constituents in natural gas samples, it is imperative that operators utilize an analyzer created specifically for natural gas analysis. PerkinElmer offers a wide selection of pre-configured, easy to operate natural gas analyzers that provide the flexibility to consider all types of samples, analyzing components of interest in gas, liquid and pressurized liquid samples using TCD and FID detection.
Please enter valid quantity
Please log in to add favorites.
NULL OR EMPTY CART
Model 2008 offers a simple, cost-effective solution for the detection of O2, N2, CO2, H2S, C1 through C5, and a C6+ composite peak in gas and liquid samples, utilizing a dual channel thermal conductivity detector (TCD) and flame ionization detector (FID) with packed and capillary columns to extend hydrocarbon analysis to C10. Minimum detection levels of 0.01% are achievable for all compounds with the exception of H2S at 0.1% on the TCD channel, and 0.001% for all reportable components on the FID channel. Model 2008 is not susceptible to degradation from common contaminants, reducing maintenance requirements and lowering total cost of ownership, and was designed to ensure that the lowest boiling C6 compound (2,2-dimethylbutane) is included in the backflush on the TCD channel, reducing interference potential. Model 2008 meets analytical requirements of ASTM D1945 and 1946, GPA 2261, and DIN 51872-5.
|Sample Type||Gas, Liquid|