UV/Vis Optics

The Pluggable Female Coupling is a female snap-on hose connector used when thermostatting polarimetry cells. This connector fits all of our polarimeters.

The Sample Compartment Window Set is a matched pair of sample compartment windows for the LAMBDA 25/35/45 spectrometers.

The General Purpose Optical Bench (GPOB) is compatible with the LAMBDA 650/850/850+/950/1050/1050+ spectrometers. This accessory features a magnetized, ruled optical bench with a moveable 60 mm InGaAs Spectralon® integrating sphere. It can analyze samples up to 400 mm in pathlength and has a wavelength range of 190 to 2500 nm.

The Standard Polarimeter Cell for Polarimetry is made of optical glass. It is a a highly efficient, thermostattable cell with no birefringence effects. It has a pathlength of 100 mm and a volume of 6.2 mL. This cell fits all of our polarimeters (Models 141, 241, 241 MC, 243, 341, and 343).

This Polarimetry Cell Stopper is made of teflon, is 10 mm long, and has a diameter of 6 mm.

This Polarimetry Cell Stopper is made of teflon, is 10 mm long, and has a diameter of 3 mm.

The Vis/NIR Monofibers are a pair of monofibers, 2 by 2 meters each with a range of 400-2400 nm. They are required by the Transfer Optic Accessory (B0509546 and L6020290). Qty. 1 pair

The Flowcell for Polarimetry cell is made of special optical glass, has a 5 mL volume capacity, and a 100 mm path length. It is highly efficient, thermostattable, and has no birefringence effects. It is easy to fill and empty with no loss of sample.

The Standard Polarimeter Cell for Polarimetry is made of optical glass. It is a a highly efficient, thermostattable cell with no birefringence effects. It has a path length of 100 mm and a volume of 6.2 mL. This cell fits all of our polarimeters (Models 141, 241, 241 MC, 243, 341, and 343).

The Optical Bench Kit is an optional accessory for the General Purpose Optical Benck (GPOB). This kit includes two magnetized, mounted iris diaphrams on two optical rails, also on mounts.

The Transmittance Sample Holder Kit is an optional General Purpose Optical Bench (GPOB) accessory. This holder positions samples on an angle to the incident beam to effect transmittance measurements. This accessory can accommodate a maximum sample size of 1 cm thick x 10 cm square. The holder is mounted on a magnetized base.

The Short Focal Length Mirror Kit consists of a short focal length (20-30 mm) concave mirror on an adjustable base with magnetic mounts to allow for small spot incidence of curved samples.

The Common Beam Depolarizer allows for measurements with depolarized light from inside a LAMBDA's sample compartment. It has a wavelength range of 190 to 2600 nm. Its setup includes a stepper drive that is controlled by UV WinLab^TM software. Installation by a PerkinElmer Service Engineer is required.

The PbS General Purpose Optical Bench is compatible with the LAMBDA 650/850/850+/950/1050/1050+ spectrometers. This accessory features a magnetized, ruled optical bench with a moveable 60 mm Spectralon® integrating sphere. It can analyze samples up to 400 mm in pathlength and has a wavelength range of 190 to 2500 nm.

This Fiber Optic Probe Tip is used with Fiber Optic Dip Probe (N1016070). It has a 5 mm path length. This tip must be ordered separately.

The Glan-Thompson Polarizer Crystal is a mounted high-performance UV/VIS/NIR polarizer crystal for use with the Double Polarizer Drive (B0505530). It has a wavelength range of 300 to 2600 nm. To ensure an equal energy level in the sample and reference beams, a second polarizer (B0505530 or B0501282) is necessary.

The Sample Holders Kit is an optional kit for the General Purpose Optical Bench Accessory. This kit includes two cantilever sample holders mounted on magnetic bases.

The Light Shield is one of the required components of the Fiber Optic Dip Probe Kit (N1016070), but it must be ordered separately.

The Transfer Optic Accessory is a monofibers holder for the LAMBDA 20/40/20Bio/40Bio/25/35/45 spectrometers. This accessory accommodates a pair of monofibers, either 2- or 10-meters long. Other optrodes are available upon request.

The UV/Vis Monofibers are a pair of monofibers with a range of 250-900 nm. Each monofiber is 2 (L) x 2 (W) meters and has a 600 micron diameter. Standard SMA adapters are included. They are required by the Transfer Optic Accessory (B0509546 and L6020290). Qty. 1 pair

This Fiber Optic Probe Tip is used with Fiber Optic Dip Probe (N1016070). It has a 2 mm path length. This tip must be ordered separately.

The Glan-Taylor Polarizer Crystal is a mounted 15 mm UV/VIS polarizer crystal for use with the Double Polarizer Drive (B0505530). It has a wavelength range of 300 to 2600 nm. To ensure an equal energy level in the sample and reference beams, a second polarizer (B0505530 or B0501282) is necessary.

The Fiber Optic Dip Probe is a 15 mm, 316-grade stainless steel probe with a wavelength of 200 to 1100 nm. Probe tips must be ordered separately.

The Film Polarizer Element works with the Double Polarizer Drive (B0505530). This high performance film polarizer has a wavelength range of 400-700 nm. Other wavelength ranges are available upon request.

The Double Polarizer Drive is installed inside the primary sample compartment of high-performance LAMBDAs, i.e., the 650/750/850/850/950/1050/1050+ spectrometers. Its orientation can be fully automated, allowing scans at a fixed wavelength or in a stepped mode. It has a scanning resolution of 25°. When in stepping mode, the polarization (depolarization) orientation can be changed up to 20 wavelength positions.