TMA Consumables & Accessories

Aluminum Oxide is an optional sample preparation powder that protects against samples sticking to a sample holder. Qty. 1 oz.

Non-magnetic.

These stainless steel straight forceps are hooked, non-magnetic, and non-serrated.

PerkinElmer's quartz probes are manufactured to extremely high tolerances to ensure the most accurate analysis data from your instrument.

The Flexure TMA Analysis Kit consists of the three-point flexure probe, a deflection platform, and an instruction manual. This kit ships standard with the TMA 4000 Advanced Analysis Kit (L8040202).

The Tare Weight Set consists of 12 stainless steel, flat body weights, ranging from 1 to 500 mg. Each weight is labeled with its weight value. Weight values meet ASTM 6 Class tolerances. This set also includes a set of forceps. This set can be ordered separately using this part number.

The Standard Stirrup Kit includes two matched stirrups consisting of a hook, stirrup ring, and frame designed to support a sample pan sitting inside the stirrup ring. These stirrups are used with the Provectus 6500 Ultramicrobalance and ship with the Provectus 6500 Installation Kit.

Included in DMA 7/DMA 7e Large Adjustable 3-Point/4-Point Bending Kit (P/N N5390478)

The Quick Press Spacer Die is a spool-like, stainless steel rod, approximately 7/8 in high with a diameter of 0.875 in. It is a component of the Quick Press and is used to seal large volume stainless steel capsule. Qty. 1

This replacement Crimper Head is a replacement part for the Standard Sample Pan Crimper Press (02190048). With this part number, you can purchase a crimper head as a replacement or spare.

Included in the Large Volume Stainless Steel Capsule Kit (P/N 03190021).

This kit includes Quick Press (09908467), Quick Press Spacer Die (03191047), 1 pair of guard Ring Inserts (03190236), and 20 of each Pan, Cover and O-Ring (03190218). Pans can withstand an internal pressure of 24 bar, which allows water samples to be heated higher than 100 °C. Each pan has an operating range of -40 °C to 300 °C, unless otherwise limited by the sample vapor pressure.

The Sealing Insert for 10µL, 30µL and 50µL Autosampler Sample Pans is one of the interchangeable inserts required by the Universal Crimper Press (B0139005). With this insert, you can crimp hermetically-sealed or volatile pans, such as Autosampler Pans and Covers (B0169319).

The Sealing Insert for Volatile Sample Pans is one of the interchangeable inserts required by the Universal Crimper Press (B0139005). With this insert, you can crimp vented or pierced pans such as Aluminum Pans and Covers (N5190788). Qty. 1

The Sealing Insert for Standard Aluminum Sample Pans is one of the interchangeable inserts required by the Universal Crimper Press (B0139005). With this insert, you can crimp standard pans such as the Standard Aluminum Pans and Covers (02190041). Qty. 1

The Sealing Insert for Large Volume Stainless Steel Sample Pans is one of the interchangeable inserts required by the Universal Crimper Press (B0139005). With this insert, you can crimp larger volume pans, such as the Stainless Steel Pans, Covers, and O-rings set (03190218). Qty. 1

These aluminum flat pans are for the standard stirrup kits used on the AD-4, AD 6000 and the Provectus 6500 microbalance for weighing samples.

The Universal Crimper Press provides high quality sample crimping for the Autosampler sample pans and can crimp the standard aluminum pans, O-Ring sealed large volume steel pans, and the 20 µL volatile pans. This is achieved simply by using the appropriate sealing insert with the Universal Crimper Press.

The Autosampler Crimper Accessory Kit supplies the inserts and sample handling supplies used by the Universal Crimper Press (B0139005) to crimp autosampler pans.

The Class 1.1 Calibrating Weight is 100 mg, per ASTM E617. It is used to calibrate the PYRIS 1 TGA Standard and High-Temperature instruments.