PerkinElmer

Imaging Accessories

OF

We offer a range of tools which allow you to prepare and manipulate samples for infrared microspectroscopy. Recommended option for the Spotlight 400 or 400N which allows convenient imaging of samples up to 10 mm thick. A large precision aligned crystal enables 400 µm areas to be collected to get more information from the sample quickly.

Products & Services (25)
Filters:
Product Type
  • Accessories (20)
  • Consumables (5)
Material
  • Barium Fluoride (2)
  • Germanium (1)
  • Potassium Bromide (1)
  • Sodium Chloride (1)
Model Compatible With
  • Spectrum (1)
  • Spotlight (4)
Product Group
  • Cell Windows & Supplies (4)
  • Forceps (1)
  • Heating Systems (2)
  • Instrument Tools (1)
  • Pin Vise (1)
  • Replacement Parts (1)
  • Sample Holders & Supplies (4)
  • Spatulas, Scoops, & Knives (1)
  • Specialty Cells (1)
  • Tool Kits (1)
  • Tweezer (1)
Shape
  • Circular (4)

Sort by

1-25 of 25 Products & Services

  • PerkinElmer

    Infrared Window for Microscopic FTIR Analysis - NaCl, 2 mm

    This Infrared Window for Microscopic FT-IR Analysis is made of sodium chloride crystal, has a diameter of 13 mm and is 2 mm thick. Qty. 1

    List Price : 57.00 USD
  • PerkinElmer

    Infrared Window for Microscopic FTIR Analysis - KBr, 2 mm

    This Infrared Window for Microscopic FT-IR Analysis is made of potassium bromide crystal, has a diameter of 13 mm and is 2 mm thick. Qty. 1

    List Price : 62.00 USD
  • PerkinElmer

    Infrared Window for Microscopic FTIR Analysis - BaF2, 1 mm

    This Infrared Window for Microscopic FT-IR Analysis is made of barium fluoride crystal, has a diameter of 13 mm and is 1 mm thick. Qty. 1

    List Price : 230.00 USD
  • PerkinElmer

    Infrared Window for Microscopic FTIR Analysis - BaF2, 2 mm

    This Infrared Window for Microscopic FT-IR Analysis is made of barium fluoride crystal, has a diameter of 13 mm and is 2 mm thick. Qty. 1

    List Price : 235.00 USD
  • PerkinElmer

    Microscope Low-E Slides - Qty. 25

    The Low-E Microscope Slides are 1 x 3 inch optical quality glass with infrared reflective coating. They are 1 mm thick to allow visible observations and infrared reflectance measurements. These slides are available for reorder with this part number. Qty. 25

    List Price : 248.00 USD
  • PerkinElmer

    Compression Cell

    The Crystal Compression Cell flattens and holds soft samples in optical contact with salt windows. 1- and 2-mm thick windows with an outer diameter of 13 mm can be used with this cell. With this part number, this cell can be ordered as a replacement or spare.

    List Price : 1112.00 USD
  • PerkinElmer

    Dissecting Forceps - 4.5 in

    The Dissecting Forceps are Cadmium-plated, aluminum forceps with one serrated tip and one sharp point tip. These forceps come standard in the Microsampling Tool Kit (N1870151).

    List Price : 27.00 USD
  • PerkinElmer

    Microsampling Tool Kit

    The Microsampling Tool Kit includes:

    • Forceps (N9302610)
    • Roller Knife (N9302619)
    • Tweezers (N9302609)
    • Tungsten Needle (N9302604)
    • Probe (N9302605)
    • Handle tor Probe (N9302622)
    • Pin Vise (N9302603)
    List Price : 421.00 USD
  • PerkinElmer

    Base Microscope Slides

    These Base Microscope Slides are uncoated optical quality glass, 1 x 3 in. They are 1 mm thick to allow for visible observations and compatible with PerkinElmer's Spotlight systems. These slides ship standard with the Sampling Accessory Kit (L1860250/L1860435).With this part number, these slides are available for reorder. Qty. 72

    List Price : 40.00 USD
  • PerkinElmer

    Silicone Crystal with Holder - Spare

    The Spare Silicone Crystal with Holder comes standard with the Micro ATR Objective Upgrade Kit (L1860334). With this part number, this crystal can be ordered separately as a replacement or spare.

    List Price : 2303.00 USD
  • PerkinElmer

    Straight Micro Probe

    The Straight Micro Probe is a straight stainless steel probe for infrared microspectroscopy. It comes standard in the Microsampling Tool Kit (N1870151).

    List Price : 61.00 USD
  • PerkinElmer

    DC-2 Diamond Compression Cell

    The DC-2 Diamond Compression Cell consists of two Hastelloy plates containing a pair of diamond windows that enable samples to be compressed to an ideal thickness for transmission measurements. This cell is compatible with the Microfocus Beam Condenser (L1272283/L1272284).
    List Price : 5100.00 USD
  • PerkinElmer

    ATR Imaging Sample Support - Qty. 10

    The ATR Imaging Sample Support is a stainless steel disc, 27 mm in diameter and 1.5 mm high. This disc comes stacked in a plastic container. Qty. 10

    List Price : 160.00 USD
  • PerkinElmer

    Micro ATR Objective Upgrade Kit

    The Micro ATR Objective Upgrade Kit upgrades Spotlight 400, Spotlight 200i, Spotlight 100i, and microscope systems without an ATR capibility with a micro ATR facility that covers the range 5,500 – 600 cm-1.

    List Price : 6200.00 USD
  • PerkinElmer

    Aluminum Probe Handle

    The Aluminum Probe Handle is used with screw-based probes. This handle comes standard with the Microsampling Tool Kit (N1870151). With this part number, this part can be ordered as a replacement or spare.

    List Price : 24.00 USD
  • PerkinElmer

    Hot Stage Accessory - 120 V

    This Hot Stage Accessory runs on 100-120 V, 60 Hz. The accessory consists of a heating block and a temperature controller that can heat samples up to 230°C in 1°C increments. The hot stage accepts FT-IR cell windows. It attaches to PerkinElmer Spotlight systems via the slide clip on the instrument's sample stage.

    List Price : 7300.00 USD
  • PerkinElmer

    Micro Specimen Tweezers

    The Micro Specimen Tweezers are made of stainless steel with a very sharp point on both arms of the tweezer to enable the precise handling of miniature and micro specimens. These tweezers come standard in the Microsampling Tool Kit (N1870151), but can be ordered with this part number as a replacement or spare set.

    List Price : 83.00 USD
  • PerkinElmer

    ATR Imaging Accessory - Large Area

    The Large Area ATR Imaging Accessory allows for convenient imaging of samples up to 8 mm thick. A large precision aligned crystal enables a 1100 x 1100 micron area to be collected to get more information from the sample quickly.

    List Price : 16900.00 USD
  • PerkinElmer

    Sample Disk Holder for Spotlight Systems

    The Sample Disk Holder is made of an aluminum alloy and accommodates up to 3 sampling discs, 13 mm in diameter. It is 76 (L) x 25 (W) x 3 (H) mm and sits on the sample stage of PerkinElmer's Spotlight systems. With this part number, you can order a replacement or spare holder.

    List Price : 38.00 USD
  • PerkinElmer

    Germanium Crystal with Holder - Spare

    The Germanium Crystal with Holder is a spare or replacement part for the Micro ATR Objective Upgrade Kit (L1860334). It covers the range 5,500-600cm-1, depending on MCT detector cut-off.

    List Price : 1859.00 USD
  • PerkinElmer

    Micro ATR Objective for the Multiscope Systems

    The Micro ATR Objective for the Multiscope Systems is an optional cassegrain objective with a 100 µm germanium or silicon crystal. This unique spring-loaded mounting device ensures optimum crystal to sample contact and protects the crystal when not in use. This accessory is included with the Micro ATR Objective Upgrade Kit (L1860334)

    List Price : 11200.00 USD
  • PerkinElmer

    Hot Stage Accessory - 220V

    This Hot Stage Accessory runs on 220-240 V, 50 Hz. The accessory consists of a heating block and a temperature controller that can heat samples up to 230°C in 1°C increments. The hot stage accepts FT-IR cell windows. It attaches to PerkinElmer Spotlight systems via the slide clip on the instrument's sample stage.

    List Price : 7900.00 USD
  • PerkinElmer

    Roller Knife

    The Roller Knife comes standard with the Microsampling Tool Kit (N1870151). It is a razor knife with a roller end. With this part number, this knife is available as a replacement or spare. Qty. 1

    List Price : 110.00 USD
  • PerkinElmer

    ATR Crystal Kit - Germanium

    The ATR Crystal Kit includes a 6.75 mm Germanium imaging crystal with an anti-reflection coating, a stainless steel ATR Crystal Sleeve, and a bonding jig. Crystal alignment and bonding instructions included.

    List Price : 2388.00 USD
  • PerkinElmer

    Pin Vise for Micro Sample Handling

    The Pin Vise for Micro Sample Handling securely holds small samples for FTIR sample preparation. It has a round, knurled steel handle with a grip range of 0-1 mm, ideal for separating thin fibers and films. Full-length holes allow the vise to accommodate wires of any length. The vise is a component of the Microsampling Tool Kit (N1870151). With this part number, it can be ordered as a replacement or spare.

    List Price : 24.00 USD