Complete Flame Photometric Detector (FPD) with PPC Add-On Kit for PerkinElmer AutoSystem XL and Clarus 500 GC, 230V

The FPD is a highly sensitive and selective detector for both sulfur and phosphorus compounds. It is especially suitable for environmental monitoring of H2S and sulfur gases in general and for organophosphorus compounds present at trace levels in pesticide analysis. Alkyl tin compounds can also be analyzed by changing the filter assembly. The sulfur filter is shipped standard.

The FPD mounts in either the front or rear detector position. This allows many detector combinations, such as FPD/FPD, FPD/TCD, and FPD/ELCD. The AutoSystem also includes a linearizer function for the sulfur mode, and convenient control of the photomultiplier tube from the keyboard. The FPD is capillary-column compatible. The detector will accept columns of 0.530 mm i.d. or less. The standard jet shipped with the FPD does not have a glass-lined tail pipe. If an all-glass system is required and glass packed columns will be used, then a glass-lined tail pipe should be ordered (N6100264). As a reminder, use of packed 1/4 in. columns requires a 1/8 in. to 1/4 in. adapter. Kit includes detector, heater, sensor, heater block, programmable pneumatic control for detector combustion gases, and sulfur photomultiplier filter. Requires but does not include FPD amplifier (N6120095). AutoSystem XL GC must be PPC ready. If not, PPC upgrade kit (N6120146) is required. (See page GC-97 for more information.) Installation by PerkinElmer Service is required but not included.