Tools

For use with flow injection.

Includes five different sizes.

Contains tools for operation and maintenance of the SPS-3.

The TAMS Laser Alignment Tool allows for easy alignment of the TAMS reference beam and sample beam.

For use with the Torion^® T-9 portable GC/MS.

For loosening upper seal.

For use with all PerkinElmer instruments with touchscreen controls. Package of 5.

Used to open the Normally Open and Normally Closed Valves on EA 2400 Elemental Analyzers.

For use wth Multiwave 3000 vessels.

The Retrieving Wire is used to remove tubes from the PE 2400 Series II Elemental Analyzer. It is a stainless steel rod, 19-3/16 in long and a diameter of 1/16 inches. It has a curved hook at one end to aid in grabbing and removing tubes from the analyzer.

The Roller Knife comes standard with the Microsampling Tool Kit (N1870151). It is a razor knife with a roller end. With this part number, this knife is available as a replacement or spare. Qty. 1

The Instruction Manual for the Fixed Angle Specular Reflectance Accessory (FASR) is available for order as a replacement or spare with this part number.

For use with a variety of modern AA Furnace Autosamplers, including the AS-800 and AS-900 installed on furnace equipped PinAAcle AA instruments.

Includes cable clamp, 3-way plug cable mount, 12 V battery charger, and STS 25 installation assembly.

Allows for easy insertion and removal of sample or reference pans or platinum lids.

A high quality quartz glass rod used to handle the quartz weighing scoop (N3142450).

Also included in Torion T-9 Basic (NTSST090505) and Advanced (NTSST090506) kits.

The Micro Specimen Tweezers are made of stainless steel with a very sharp point on both arms of the tweezer to enable the precise handling of miniature and micro specimens. These tweezers come standard in the Microsampling Tool Kit (N1870151), but can be ordered with this part number as a replacement or spare set.

Included in UHPLC (N2930801) HPLC Starter Kits (N2930802).

The Single Quill Brush is a component of the Solid Sample Handling Kit (N2410146). With this part number, you can order it separately to replenish your supplies. Qty. 12

Basic Techniques in IR/FTIR is basic user guide that includes all the information necessary to get started using your IR/FTIR system.

The Hayman Micro Spatula is a 6.25 in long double-ended spatula with a 1.25 in (L) x 0.125 in (W) spatula on one end and a 0.5 in (L) x 0.125 in (W) spoon-like end on the other end. This nickel-plated stainless steel spatula is designed for handling microliter-sized solid sample volumes or smaller. Qty. 1

These stainless steel straight forceps are hooked, non-magnetic, and non-serrated.

Non-magnetic.