Cyclonic, Baffled Cyclonic, and Ryton Scott Spray Chambers provide maximum sensitivity and efficiency. The spray chamber is an integral part of the sample introduction; it affects precision and is responsible for filtering the sample mist to permit the appropriate droplet size distribution to reach the plasma.
The right consumables, accessories, methods and application support are as integral to the success of your laboratory as your instrumentation. That’s why we invest heavily in testing and validating our complete portfolio of solutions to ensure that you receive accurate, repeatable results, on-time, every time throughout the lifetime of your instrument. Whether you are conducting routine raw materials validation or performing the most demanding applications analysis, your success is our top priority. Together, we can help improve your efficiency, control costs, and optimize your analysis.
Sort by
1-25 of 163 Products & Services
This IsoMist Programmable Temperature Controlled Spray Chamber is for use with Optima 4x00/5x00/7x00 DV/8x00 ICP-OES series instruments. The IsoMist XR now features an improved thermodynamic design providing an extended temperature range and faster cool-down, so your ICP is ready to go sooner. IsoMist XR has a peltier unit with a range of -25°C to +80°C.
This glass water-cooled baffled cyclonic spray chamber, with gas port and ball joint connection, is used with ELAN® DRC, DRCplus, and DRC II ICP-MS series instruments.
All matrix solution, metal-free spray chamber gas line, 22.9 cm in length, used with NexION® 2000 ICP-MS series instruments. This 0.25 mm I.D. gas line is used for gas dilution of high TDS samples in cyclonic spray chambers.
This PFA baffled cyclonic spray chamber, with drain line (N8141425), is used with Optima® 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV and 8x00 ICP-OES series instruments. This spray chamber offers resistance to HF acid while maintaining the benefits of a typical cyclonic spray chamber. The O-ring-free seal also reduces contamination and provides an easy to clean low maintenance system.
This IsoMist Programmable Temperature Controlled Spray Chamber is for use with NexION 300/350 ICP-MS series instruments. The IsoMist XR now features an improved thermodynamic design providing an extended temperature range and faster cool-down, so your ICP is ready to go sooner. IsoMist XR has a peltier unit with a range of -25°C to +80°C.
This PC3X Peltier heated and cooled inlet system, which includes drain tube, mounting bracket, and two M4x20 screws, is for cyclonic spray chambers used with NexION® 1000 and 2000 ICP-MS series instruments. Does not include spray chamber.
This cyclonic spray chamber adaptor is used with Optima™ 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments.
This high performance sample introduction kit includes various consumables and components used with ELAN® 5000, 6x00, 9000, DRC II, DRC-e ICP-MS series instruments. The Quartz Cyclonic Sample Introduction Kit (N8120519) is also available for ELAN® series instruments.
This Spray Chamber Complete Assembly is for use with the Plasma 400 ICP-OES series instruments. This complete assembly contains both the inner tube and outer chamber. The Ryton Scott Spray Chamber is made from corrosion-resistant Ryton, which is inert to most mineral acids including HF, Aqua Regia, and all organic solvents normally used in ICP analyses. The Scott-type design also minimizes pulsations from the peristaltic pump.
This 50 mL borosolicate glass Twister™ spray chamber, with incorporated Helix™, is used with ELAN® 6000, 9000, DRC II, and DRC-e ICP-MS series instruments that utilize torch adaptors WE023951 and W1012406.
This Baffled Cyclonic C3 High Sensitivity Spray Chamber is used with NexION® 1000 and 2000 ICP-MS series instruments. It is recommended for use in the NexION® 2000 Base Configuration and is an ideal all-purpose spray chamber for non-HF samples.
This PFA Spray Chamber is for use with Avio® 200 and 500 ICP-OES series instruments. It is all-purpose spray chamber which offers resistance to hydrofluoric acid. It features a chemically inert PFA construction that results in low contamination and long life time, as well as an O-Ring free seal to reduce contamination and provide an easy to clean low maintenance system.
This Ryton® Scott spray chamber is used with Optima®™ 3000, 3000 SCR, and 3x00 RL ICP-OES series instruments. The Ryton Scott Spray Chamber is made from corrosion resistant Ryton, which is inert to most mineral acids including hydrofluoric acid, aqua regia and all organic solvents normally used in ICP analyses. The Scott-type design also minimizes pulsations from the peristaltic pump.
This Baffled Quartz Cyclonic C3 High Sensitivity Spray Chamber is used with NexION® 1000 and 2000 ICP-MS series instruments. It is an ideal all-purpose spray chamber for non-HF samples and provides excellent sensitivity, stability, and reduced boron blank. This spray chamber is designed for applications requiring low levels of boron and silicon detection and includes a Matrix Gas Port.
This IsoMist Programmable Temperature Controlled Spray Chamber is for use with Optima 4x00/5x00/7x00 DV/8x00 ICP-OES series instruments. The IsoMist XR now features an improved thermodynamic design providing an extended temperature range and faster cool-down, so your ICP is ready to go sooner. IsoMist XR has a peltier unit with a range of -25°C to +80°C.
This IsoMist Programmable Temperature Controlled Spray Chamber is for use with Optima 4300/5300/7300 V ICP-OES series instruments. The IsoMist XR now features an improved thermodynamic design providing an extended temperature range and faster cool-down, so your ICP is ready to go sooner. IsoMist XR has a peltier unit with a range of -25°C to +80°C.
This spray chamber adapter is used in the NexION® 300 and 350 D/Q/S/X adjustable torch mount assembly (W1037485).
This Quartz Baffled Micro Cyclonic Spray Chamber, with drain line (N8141425), is used with Optima® 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments. It features a 7 mm baffle and is recommended for aqueous applications.
This Aerosol Chamber Kit is for U5000AT+ and U6000AT+ Nebulizers in ICP-OES and ICP-MS series instruments.
This 20 mL cyclonic Cinnabar™ spray chamber, with incorporated Helix™, is used with ELAN® 6000, 9000, DRC II, and DRC-e ICP-MS series instruments that utilize torch adapters WE023951 or W1012406
This IsoMist Programmable Temperature Controlled Spray Chamber is for use with Avio 200/500 ICP-OES series instruments. The IsoMist XR now features an improved thermodynamic design providing an extended temperature range and faster cool-down, so your ICP is ready to go sooner. IsoMist XR has a peltier unit with a range of -25°C to +80°C.
This borosilicate glass baffled cyclonic spray chamber, with drain fitting, is used with NexION® 300 and 350 ICP-MS series instruments.
This O-ring-free aqueous 50 mL borosilicate glass Twister spray chamber, with integrated Helix™, is designed for use with aqueous applications with Optima® 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments. It is included in the Glass Cyclonic Sample Introduction System for ELAN® (N8120518) as well.
Sort by
1-1 of 1 Business Insights
