Whether you're performing atomic spectroscopy or gas chromatography, we have injectors for any application. From injectors for ICP-OES to split and split-less injectors for GC, we have the injectors you need.
The right consumables, accessories, methods and application support are as integral to the success of your laboratory as your instrumentation. That’s why we invest heavily in testing and validating our complete portfolio of solutions to ensure that you receive accurate, repeatable results, on-time, every time throughout the lifetime of your instrument. Whether you are conducting routine raw materials validation or performing the most demanding applications analysis, your success is our top priority. Together, we can help improve your efficiency, control costs, and optimize your analysis.
Sort by
1-25 of 154 Products & Services
This Injector nut is used with NexION® 300 and 350 ICP-MS series instruments.
This injector is designed for use with standard demountable torches in NexION® 1000 and 2000 ICP-MS series instruments. The demountable design allows the injector to be removed and replaced efficiently without dismounting the torch. An injector light shield is also included to protect the torch and injector base from discoloration caused by the plasma.
This injector is compatible with the Demountable Quartz Torch - Black Mark (N8152379), Demountable UHP Quartz Torch - Gray Mark (N8152448), and the Demountable Organics Quartz Torch - Orange/Black Mark (N8152596) for NexION® 1000/2000.
This Ball Joint Injector is for use with ELAN® and NexION® 300/350 ICP-MS series instruments. It is designed for use with Pass-Through Ball Joint Injector Support Adapters (WE023951 or W1012406). Quartz injectors are ideal for volatile organic solvent introduction and recommended for a wide range of non-HF applications.
This Lock Collar is for use with Avio® 200/500 ICP-OES series instruments. It is available as a replacement part for the Cyclonic Injector Assembly (N0790141) and the Scott Injector Assembly (N0790156) for Avio® 200/500.
This Quartz Injector is used with ELAN® and NexION® 300/350 ICP-MS series instruments. It is designed for use with the HF-Resistant Sample Introduction System (WE024782).
This Demountable Injector is for use with Optima® 8x00 ICP-OES series instruments. It is designed for use with the quartz, organics and silicon nitride demountable ZipTorches. The demountable design allows the injector to be removed and replaced efficiently for cleaning without dismounting the torch.
This Injector Support Adapter is for use with ELAN® 9000/6x00/5000/DRC-e ICP-MS series instruments. The Twist Type Torch Adapter does not include O-rings.
Starter kit for Programmed-Temperature Split/Splitless Injector System.
This Sapphire Injector is for use with Optima® 2.0 mm I.D. Sapphire Injector for Optima® 2x00/4x00/5x00/7x00 DV ICP-OES series instruments. Sapphire injectors are ideal for silicon applications.
This Injector Support Adapter O-Ring, 9.25 mm I.D. and 1.78 mm width, is for use with ELAN® and NexION® 300/350 ICP-MS series instruments. It is designed for use with both the Twist Type Torch Injector Support Adapter and the Cassette Type Torch Injector Support Adapter.
This Alumina Injector is used with Optima® 4300V/5300V/7300V ICP-OES series instruments. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.
This Injector Support Adapter is for use with ELAN® DRCs ICP-MS series instruments. It is designed for Quartz Ball Joint Injectors.
This Quartz Injector is for use with Avio® 200 and 500 ICP-OES series instruments. They are designed for organic solvents and non-HF matrices.
This Ball Joint Injector is for use with ELAN® and NexION® 300/350 ICP-MS series instruments. It is designed for use with Pass-Through Ball Joint Injector Support Adapters (WE023951 or W1012406). Quartz injectors are ideal for volatile organic solvent introduction and recommended for a wide range of non-HF applications.
This high performance sample introduction kit includes various consumables and components used with ELAN® 5000, 6x00, 9000, DRC II, DRC-e ICP-MS series instruments. The Quartz Cyclonic Sample Introduction Kit (N8120519) is also available for ELAN® series instruments.
Sort by
1-1 of 1 Business Insights
