Autosampler Supplies

The autosampler has a 3-channel peristaltic pump that accepts below listed tubes when running inorganic acids. 2 – 2 mm ID Pharmx, Black Tabs, Rinse 1 – 3.2mm ID Pharmx, White Tabs, Waste

This kit is comprised of all necessary tubing required to connect to an HTS system. The system comes standard with a 1 mL loop which is diverse in terms of its use and application. This Tubing and Loop Kit is designed for use in NexION 1000 and 2000 ICP-MS series instruments.

The stirrer block is a component in the sample homogenization process for the ASX-1400 and ASX-1600 autosamplers.

This 11 mm 96-well microtiter plate has a 200 µL volume capacity. It is compatible with the Series 200 Autosampler for high throughput and high speed applications. A Cover Mat for 96-well microtiter plates (N9302563) available separately.

PerkinElmer’s High Throughput System (HTS) affords ultra-fast analysis, dramatically reducing laboratory overheads and the cost of analysis. This kit contains two high density polyethylene (HDPE) bottles which were chosen due to the acid-resistant properties and longevity of HDPE. The bottles are used for internal standard and carrier solutions in HTS applications.

These sterile PerformR^™ autosampler tubes are designed for your everyday centrifugation and storage needs. These tubes include large white solvent resistant labeling areas and black easy to read graduations. PerformR^™ Centrifuge Tubes are autoclavable with a standard 122°C plasticware process for 15 minutes.

This High Purity PFA Pipette Tip is for use with HF-Resistant Sample Introduction Kits. High purity PFA pipette tips are used to minimize contamination of semiconductor and biological samples.

This kit features a single check valve outlet, made of Viton^® equivalent material, for the APS-1650.

SuperClear^™ tubes are made from a unique medical grade resin. This high quality resin makes it possible for you to spin these tubes at g-forces up to 233% greater than other tubes. SuperClear^™ Centrifuge Tubes are autoclavable with a standard 122°C plasticware process for 20 minutes and can be used for frozen storage to -80°C. They also feature flat caps an integral molded-in sealing ring for exceptional sealing capability.

This Medium PVDF Male Luer is for use in FAST systems. This luer is for the 3.2mm barb. It is included in the FAST Spares Kit for NexION 1000/2000 (N8150487), the FAST Deluxe Spares Kit for NexION 1000/2000 (N8150488), and the prepFAST Spares Kit (N8150452).

This In-Line Check Valve is for use in SC-FAST Autosampler Systems with Pumped Rinse. It features a 1/4-28 threaded inlet and outlet.

This PEEK/PTFE Rotor is for use with the High-Flow 6-Port Valve in SC-FAST Autosampler Systems. The complete valve features a 0.8 mm bore size. High-purity valve stators and rotors provide a liquid path with low contamination and low carryover for the best ICP-MS results. PEEK/PTFE composite rotors offer excellent chemical resistance and longer lifetimes than PTFE rotors.

The Check Valve Kit contains three check values for the ASXPRESS^® PLUS.

These PFA insert caps, with knurled grip, are used with 16 mm outer diameter PFA tubes.

The Thumbscrew and O-ring Kit includes thumbscrews, clamps, and o-rings for the ASX-260, ASX-280, ASX-520, ASX-520HS, ASX-560, EXR-8, XLR-8, and XLR-860.

These snap-on caps are designed for use with 14 mm outer diameter PFA micro vials. PFA Knobbed Caps (N0777392) are also available for 14 mm Graduated PFA Micro Vials.