ICP-OES Assure Consumables

This kit is recommended for use with organic solvents and comes with its own rinse station, allowing the quick change between aqueous and organic analysis. Purchase of this kit with an additional tray for your autosampler N0831037 or N0831038 for the S23 and S25 autosamplers respectively allows for a dedicated organics setup, providing a simple transfer between aqueous and organics samples.

Probe fitting kit includes:

• 1 – Barb Fitting (Tan)
• 1 – 1/16” Flangeless Fitting (Blue)
• 2 – 1/16” CTFE Ferrules (Clear)

Scott Spray Chamber Clamp Adapter

This Carbon Fiber Support Probe is for use with SC DX Autosamplers with ST Nebulizers.

This Demountable Injector is for use with Optima^® 4x00/5x00/7x00 ICP-OES series instruments. It is designed for use with the quartz, organics and silicon nitride demountable ZipTorches. The demountable design allows the injector to be removed and replaced efficiently for cleaning without dismounting the torch.

Standard 2 blue bands autosampler probe with attached 108" capillary tubing for Teledyne Cetac Autosamplers. Ideal for coolants and not intended for use with oil applications.

Standard red band autosampler probe with attached 108" capillary tubing for Teledyne Cetac Autosamplers. Ideal for coolants and not intended for use with oil applications.

Replaceable quartz window that slides into the purge extension between the torch and the optics.

This SeaSpray^™ Direct Connection Nebulizer is for use with Avio^® 200/500 and Optima^® 4x00/5x00/7x00/8x00 ICP-OES series instruments. It has a UniFit sample connector which slides easily over the sample arm and an argon connector configured to connect directly to your ICP. This SeaSpray^™ nebulizer also features an inert metal-free argon connector, instrument-specific Direct Connect flexible Argon line, and a reliable ratchet fitting that ensures leak-free gas connection. Includes Gas Fitting with ratchet connector (N0811308).

This SeaSpray^™ Direct Connection Nebulizer is for use with Avio^® 200/500 and Optima^® 4x00/5x00/7x00/8x00 ICP-OES series instruments. It has a UniFit sample connector which slides easily over the sample arm and an argon connector configured to connect directly to your ICP. This SeaSpray^™ nebulizer also features an inert metal-free argon connector, instrument-specific Direct Connect flexible Argon line, and a reliable ratchet fitting that ensures leak-free gas connection. Includes Gas Fitting with ratchet connector (N0811308).

Each V-Solv^™ standard is supplied with a comprehensive Certificate of Analysis that documents the quality and reliability.

Each V-Solv^™ standard is supplied with a comprehensive Certificate of Analysis that documents the quality and reliability.

The optional ceramic outer tube is of particular benefit for ICP applications where a quartz outer tube will suffer from a short lifetime. High TDS applications cause quartz to rapidly devitrify and organic solvents can cause quartz to fracture, whereas the ceramic outer tube will last years under the same conditions.

This MEINHARD^™ Concentric Nebulizer, with 0.7 L/min Argon flow rate and 1 mL/min uptake rate, is for use with Optima 4x00/5x00/7x00/8x00 and Avio 200/500 ICP-OES series instruments. Type K nebulizers are for high solids and low argon flow.

This Flat Mirror Kit is for use with Avio 500 ICP-OES series instruments.

Cobalt V-Solv^™ ICP Solvent

This organics sample introduction kit, which includes a nebulizer, torch, injector and spray chambers, is used with Avio^™ 200 ICP-MS series instruments.

This Oxygen Addition Kit is for use with Avio^® 200 and 500 ICP-OES series instruments.

This sample introduction module, with cyclonic spray chamber and MEINHARD^® concentric nebulizer, includes core components and consumabls used with Avio^™ 500 ICP-OES series instruments.

This sample introduction accessory kit is for use with Avio^® 200 and 500 ICP-OES series instruments. Hydride ICP is the smallest, highest-performing and most stable gas liquid separator on the market.

This Optical Kit is for use with Avio 500 ICP-OES series instruments. It is intended to protect the spectrometer from the outside environment while allowing light to pass through. This kit includes Purge Extension Window O-rings.

This Optical Kit is for use with Avio 200^® ICP-OES series instruments. It is intended to protect the spectrometer from the outside environment while allowing light to pass through. This kit includes Purge Extension Window O-rings.

This 50 mL TFE Tracey^™ spray chamber, with grounding strap and helix locking screw, is used with Avio^™ 200 and 500 ICP-OES series instruments.