Automated headspace sampler with built-in trap and standard PerkinElmer 22mL sample vials.
Please enter valid quantity
Please log in to add favorites.
NULL OR EMPTY CART
Up to 110 vials can be loaded into the removable vial magazine for automated analysis. Overlapping thermostatting of up to 12 vials in Constant Mode for maximum productivity. A patented optimization algorithm adjusts the virtual oven size for maximum throughput. BCD output is included. An optional frequency-scanning shaker is available to reduce equilibration time. No optimization of the shaking process is required.
|Maximum Temperature||32 °C|
|Minimum Temperature||15 °C|
|Product Brand Name||TurboMatrix|
Butylated hydroxytoluene (BHT) is a common food additive used to protect foods from spoilage. Concern exists that long-term human consumption of BHT may have potential health risks. Analysis of BHT is needed for both food quality and safety reasons.
Epichlorohydrin, a raw material found in resins, can occur in drinking water at concentration which are hazardous to human health. The use of ephichlorohydrin is increasingly regulated. This article presents an analytical technique to determine the concentration of epichlorohydrin in the drinking water, in response to the requirements of the European Normative 98/83/EC, which recommends limiting the concentration to a maximum of 0.1 ug/L.
This application note demonstrates the use of a new sample-introduction technology incorporated in TurboMatrix HS-110 Trap for U.S. EPA Method 8260B for analysis, identification and quantification of volatile organic compounds (VOCs) that have boiling points below 200 °C.
ASTM International publishes a number of different methods for the determination of volatile compounds in water-based coatings. Method D3960 is a gravimetric technique where a sample of known weight is baked under specific conditions; the % weight of volatile organic compounds (VOCs) is calculated from a series of measured masses. The method that was presented here will reliably analyze difficult compounds in a difficult matrix with great precision, linearity, and without carryover.
Journal of Chromatographic Science - A new analytical method for the determination of halogenated and aromatic volatile organic compounds in groundwater, mineral water, and drinking water at concentrations ranging between 1–10000 ng/L is developed..
The development of methodology to measure VOCs at low levels using GC-MS coupled with Headspace Trap sample introduction is described here. The methodology is based on U.S. EPA Method 8260B.
Increasing demands for efficiency, productivity, data quality, and profitability pose ongoing challenges for lubricant testing labs, like yours. Whether you need to achieve quick turnaround times, minimize downtime, or maximize lab efficiencies, you can rely on PerkinElmer for a comprehensive set of simple-to-use and proven testing solutions to help you achieve accurate results in record time. Learn more about our solutions.
Headspace Gas Chromatography—for applications involving the solvent-free extraction of volatile compounds, it’s an unsurpassed technique, eliminating the time-consuming steps and risk of human error associated with other GC sample-preparation methods.
This field application report describes the use of a TurboMatrix™ HS-110 Trap and Clarus® 500 GC/MS optimized for low-level determination of fuel oxygenates by U.S. Environmental Protection Agency Method 8260B using the new headspace-trap technology.
2,4,6-trichloroanisole (TCA) is found in the cork used to seal glass wine bottles. The determination of TCA in wine is necessary due to the extremely low level of sensory perception for this compound. The literature reports taste thresholds to be between 4 and 10 parts per trillion (ppt) in white wines and between 10 and 30 ppt for the heavier red wines.1 Above these thresholds, wines have an undesirable flavor.
Increasing demands for efficiency, productivity, data quality, and profitability pose ongoing challenges for lubricant testing laboratories, like yours, performing new lubricant or in-service oil analyses.
Whether you need to achieve quick turnaround times, minimize downtime, or maximize lab efficiencies, you can rely on PerkinElmer as a trusted partner for simple-to-use and reliable testing solutions.
Partnering with leading global standards organizations and hundreds of oil laboratories, we continually address laboratory needs and ever-changing standards while developing new methods and protocols that conform with ASTM®, regulatory, and customer-defined requirements.
Download this infographic to learn more about our broad range of proven lubricant testing solutions.
Consumables reference guide for the TurboMatrix Headspace. TurboMatrix Headspace and high-sensitivity Headspace Trap samplers provide unparalleled precision and ease of use for numerous GC or GC/MS volatile-analysis applications. The system can manage up to 12 samples simultaneously, ensuring that the next sample is ready for analysis upon completion of the previous run, achieving significant time savings.
The Polymer Market consists of a huge diversity of manufacturers of industrial products running many different processes yet still facing similar challenges. There is more and more pressure to achieve high product quality and reduce costs in order to stay one step ahead of the competition.