Thermal Analysis Consumables

Colorcarb is an Elemental Analysis reagent mixture consisting of Ascarite II and Mallcosorb AR 20 - 50 Mesh. Typically included in several kits, Colorcarb can be ordered individually as a replacement or spare. Powder. Qty.100 g.

Copper Plus is an Elemental Analysis reagent. Typically included in several kits, Copper Plus can be ordered individually as a replacement or spare. Granular. Qty. 454 g

This part can be ordered as a replacement part for the Lower Die of the Volatile Sample Pan Sealer Assembly.

Silver Tungstate/Magnesium Oxide is an Elemental Analysis reagent. Typically found in supply and sample kits, this reagent can also be ordered individually as a replacement or spare. Qty. 100 g

Copper Oxide, Wire Form, is an Elemental Analysis reagent. Typically found in analysis kits and the Pre-packed Red Tube-Silica Tube, this reagent can also be ordered individually as a replacement or spare. Qty. 454 g

This part can be ordered as a replacement part for the Upper Die of the Volatile Sample Pan Sealer Assembly.

Copper Plus, Wire Form, is an Elemental Analysis reagent. Typically found in various EA kits and tubes, this reagent can also be ordered individually as a replacement or spare. Qty. 454 g

The Sample Pan Manipulator Tip is the black, anti-static, silicone suction cup at the end of sample pan manipulator tools. With this part number, you can order this tip as a replacement or spare. Qty. 1

The Perkalloy Calibration Material is a 2 in long wire, approximately 300 mg, with a transition point of 596°C. It comes standard in the TGA 8000 Calibration Standards Kit, but with this part number, can be ordered separately to replenish your supply. Qty. 1

The CHNS Prepacked Silica Reduction Tube is found in the CHN Analysis kit. These tubes have an estimated life of 2000 runs. These tubes are packed with the reagents Copper + and Cuprox. With this part number, you can replenish your supply. Qty. 1

Cyclohexanon is an Elemental Analysis calibration standard. Typically found in the Combustion Standards kit, Cyclohexanon can also be ordered individually as a replacement or spare. Qty. 4 g.

The nitrile O-Ring has an inner diameter of 1.475 in and is 0.210 in wide. It comes standard in the TGA 8000 Spares Kit (N5320026). Qty. 1

The CHNS Prepacked Oxidation/Reduction Tube is found in the CHNS Analysis Kit. These tubes contain the reagents EA 6000 and Cuprin. They have an estimated life of 70 runs. With this part number, you can replenish your supply. Qty. 1

The Zinc Reference Standard is used to calibrate all DSC instruments. It is pre-crimped, weighted, and has a transition point of 419.47°C.

Silicone Grease is a high-vacuum lubricant used in a variety of PerkinElmer's thermal analyzers and accessories. It comes in a 5.3 oz tube and can be ordered separately as a replacement or spare.

The Turbulent Chamber Kit, also known as the Water Circulator Puck Kit, works with the TMA 4000 analyzer. It contains twenty-four feet of round Tygon tubing (02506519), four stainless steel hose clamps (09903004), and the Turbulent Chamber assembly (04190367).

This reliable sealing tool is fast and precise. It employs a built-in torque clutch which guarantees that all capsules are closed with the same torque.

The Viton O-Ring has an inner diameter of 1.171 in and is 0.139 in wide. It comes standard in the TGA 8000 Spares Kit (N5320026). Qty. 1

The Advanced Analysis Kit contains a synthetic sapphire standard disk, the Quartz TMS Dilameter Kit, the TMA Analysis Kit, the Extension Kit, Aluminum Oxide Powder, and a selection of probes and tubes for use with the TMA 4000.

The CHN Prepacked Oxidation Pyrolysis Tube is found in the Oxidation Analysis Kit. These tubes have an estimated life of 1000 runs. These tubes are packed with Platinized Carbon and Cuprin. With this part number, you can replenish your supply. Qty. 1