Spray Chambers

This long PFA secure replacement nut, with a 6.25 mm I.D. through hole, is used with quartz cyclonic spray chambers in NexION^® 300 and 350 ICP-MS series instruments. It secures the nebulizer to the spray chamber.

This quick-change sample introduction module for oil analysis, with cyclonic spray chamber and GemCone^™ concentric nebulizer technologies, includes core consumables and components used with Optima^™ 4300 V, 5300 V, and 7300 V series instruments.

This organics spares kit includes various consumables and components used with Optima^™ 2x00 DV, 4x00 DV, 5x00 DV, and 7x00 DV ICP-OES series instruments.

This PC^3X Thermally Stabilized Inlet System is for use with NexION^® 1000/2000 ICP-MS series instruments. It includes High Performance PFA Spray Chamber with End Cap (N8150454). The PC^3x for the High Performance PFA spray chamber is a compact, Peltier heated or cooled inlet system that offers the advantages of low memory effects, constant temperature, rapid wash-out and high sample transport efficiency. In cooling mode the PC^3x cools the outer walls of the chamber, reducing the water or solvent vapor loading on the plasma, achieving enhanced stability and performance. In heating mode, sensitivity can be improved for low flow applications.

This PFA Spray Chamber is for use with Avio^® 200 and 500 ICP-OES series instruments. It is all-purpose spray chamber which offers resistance to hydrofluoric acid. It features a chemically inert PFA construction that results in low contamination and long life time, as well as an O-Ring free seal to reduce contamination and provide an easy to clean low maintenance system.

Metal-free addition gas line, 25.4 cm in length with 0.8 mm inner diameter, used with NexION^® 1000 and 2000 ICP-MS series instruments. It is designed for hydrofluoric acid and organics applications.

All matrix solution, metal-free spray chamber gas line, 22.9 cm in length, used with NexION^® 2000 ICP-MS series instruments. This 0.25 mm I.D. gas line is used for gas dilution of high TDS samples in cyclonic spray chambers.

This Baffled Quartz Cyclonic C3 High Sensitivity Spray Chamber is used with NexION^® 1000 and 2000 ICP-MS series instruments. It is an ideal all-purpose spray chamber for non-HF samples and provides excellent sensitivity, stability, and reduced boron blank. This spray chamber is designed for applications requiring low levels of boron and silicon detection and includes a Matrix Gas Port.

This quick-change sample introduction module, with Scott spray chamber and GemTip Cross-Flow nebulizer technologies, includes core components and consumables used with Optima^™ 2x00 DV, 4x00 DV, 5x00 DV, and 7x00 DV ICP-OES series instruments.

This large Viton^™ O-ring is for use with hydrofluoric acid-resistant Ryton Scott Spray Chambers in ELAN^® 5000/6x00/9000/DRC-e and NexION^® 300/350 ICP-MS series instruments.

This high performance sample introduction kit includes various consumables and components used with ELAN^® 5000, 6x00, 9000, DRC II, DRC-e ICP-MS series instruments. The Quartz Cyclonic Sample Introduction Kit (N8120519) is also available for ELAN^® series instruments.

This PFA Spray Chamber with Gas Port is for use with Avio^® 200 and 500 ICP-OES series instruments. It is all-purpose spray chamber which offers resistance to hydrofluoric acid. It features a chemically inert PFA construction that results in low contamination and long life time, as well as an O-Ring free seal to reduce contamination and provide an easy to clean low maintenance system.

This PC^3X Peltier heated and cooled inlet system, which includes drain tube, mounting bracket, and two M4x20 screws, is for cyclonic spray chambers used with NexION^® 1000 and 2000 ICP-MS series instruments. Does not include spray chamber.

This IsoMist Programmable Temperature Controlled Spray Chamber is for use with Avio 200/500 ICP-OES series instruments. The IsoMist XR now features an improved thermodynamic design providing an extended temperature range and faster cool-down, so your ICP is ready to go sooner. IsoMist XR has a peltier unit with a range of -25°C to +80°C.

This borosilicate glass baffled, cyclonic, jacketed Twister^™ spray chamber, with incorporated Helix^™, is used with Optima^® 4300 V, 5300 V, 7300 V, and 3x00 RL ICP-OES series instruments.

This PFA barrel spray chamber is used with NexION^® 1000 and 2000 ICP-MS series instruments. This high sensitivity spray chamber is designed for semiconductor and other high purity applications. It is recommended for use with HF acid and contains an O-ring free PFA end cap.

This Adjustable Shelf is designed for mounting the PC³ and PC^3X Peltier coolers on Avio^® 500 ICP-OES series instruments.

This 50 mL baffled cyclonic Twister^™ spray chamber, with incorporated Helix^™ and additional gas port, is used with ELAN^® 6000, 9000, DRC II, and DRC-e ICP-MS series istruments.

This 47 mL PFA barrel spray chamber, with PFA end cap and drain line (N8141425), is used with NexION^® 300 and 350 ICP-MS series instruments. This spray chamber requires PFA Body Injector (N8122411), (N8122412), or (N8122413).