1-25 of 308 Products & Services
This Pt/Ir Capillary Assembly is for use with PinAAcle® 500 and 900 AA series instruments. It is designed for use in the Standard Plastic High Sensitivity Nebulizer Complete Assembly for PinAAcle® (N3160144).
This Eluo Nebulizer cleaner is for use with newer OpalMist™, PolyCon, DuraMist™, MEINHARD™, and other glass nebulizers. It is important to regularly clean nebulizers since particle build-up in a capillary and tip causes sample flow to be constricted, thereby reducing nebulizer efficiency and performance.
This spacer is for use with AAnalyst® 200/400/700/800 and PinAAcle® 500/900 AA series instruments. It is designed for use in plastic body nebulizers.
This Retrofit Kit can be used with Optima® 2x00/4x00/5x00/7x00/8x00 ICP-OES series instruments. This kit includes the Crossflow Nebulizer and End Cap Assembly (N0680503) and the fittings required to install the nebulizer.
This Nebulizer Liquid Connector Kit is for use with PerkinElmer ICP-MS instruments. It includes a 4 in. PFA capillary tubing flanged onto a female CTFE fitting (N8145018) and a separate male barb CTFE fitting (N8145017).
This High Sensitivity Nebulizer Assembly, with Platinum/Iridium needle and Viton o-rings, is for use with PinAAcle® 500/900 AA series instruments. It provides maximum sensitivity, precision and freedom from analytical interferences.
This PFA MicroFlow Nebulizer with Integrated Autosampler Probe for ICP-OES and ICP-MS series instruments. These nebulizers self-aspirate at low flow rates with any autosampler and provide the same benefits of the PFA MicroFlow nebulizer. MicroFlow nebulizers are resistant to clogging, reliably self-aspirated or pumped to produce a fine aerosol for high transport efficiency and high sensitivity. The integrated sampling probe is constructed by encapsulating a rigid support material between layers of PFA to provide a chemically-resistant probe that is mechanically stable and resilient.
This Slurry™ Nebulizer, with 0.7 L/min Argon flow rate and 4.0 mL/min uptake rate, is for use with Optima® 4x00/5x00/7x00 DV series, Optima® 8x00 and Avio® 200/500 ICP-OES series instruments. It is ideal for the analysis of used engine oils for wear metals.
This MicroMist™ Nebulizer is used with NexION® 1000 and 2000 ICP-MS series instruments. The MicroMist™ micro-uptake glass concentric nebulizer offers high performance for limited sample volumes.
This Nebulizer Insert is for use in AAnalyst® 100/200/300/400/700/800, PinAAcle® 500/900F/900H/900T/900Z, and earlier AA series instruments.
This spring is used with AAnalyst® 100/300/200/400/700/800 and Models 1100(B)/2100/3100/3110/4100/5100PC AA series instruments.
This quick-change sample introduction module for oil analysis, with cyclonic spray chamber and GemCone™ concentric nebulizer technologies, includes core consumables and components used with Optima™ 4300 V, 5300 V, and 7300 V series instruments.
This Nebulizer Liquid Fitting is designed for use with MEINHARD™ Plus nebulizers in PerkinElmer ICP-MS instruments.
This PTFE Mira Mist™ nebulizer, with 0.2 to 2.5 mL/min uptake rate, is used with Avio® 200 and 500 ICP-OES, and Optima® 2x00 DV, 3x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments. The Mira Mist™ fits regular spray chambers as a direct placement for glass concentric nebulizers.
The PerkinElmer GemTip Cross-Flow II Nebulizer is for use with the Optima® 8x00 and Avio® 200/500 ICP-OES series instruments. It is a excellent general purpose nebulizer for the analysis of strong mineral acids (including HF) and samples with less than 5% dissolved solids.
This Obstruction Removal Kit was designed for use with MicroFlow ST nebulizers in PerkinElmer ICP-OES and ICP-MS instruments. While naturally resistant to obstructions, PFA nebulizers may occasionally require maintenance. Use this kit to safely remove obstructions in all PFA-ST nebulizers for long-term high performance.
This Ultra-High Purity Quartz MEINHARD™ Plus Nebulizer, with 0.5 mL/min uptake rate, is for use with NexION® 1000/2000 ICP-MS series instruments. MEINHARD™ Plus Nebulizers have the lowest dead volume of any glass or quartz nebulizer. The low dead volume and high sensitivity provide excellent detection limits and washout. It features the lowest contamination, especially for Al, Fe, K. It includes the PFA FG Gas Quick Connect (N8121036) and F2 Standard Integrated Capillary (N8121039).
This High Sensitivity Nebulizer Assembly, with Tantalum needle and Kalrez o-rings, is for use with PinAAcle® 500/900 AA series instruments. This complete assembly with Tantalum capillary assembly is for use with solutions containing aqua regia. It provides maximum sensitivity, precision and freedom from analytical interferences.
This glass MicroMist™ nebulizer includes connectors and sample tubing for use with ELAN® 5000/6x00/9000/DRCs and NexION® 300 and 350 ICP-MS series instruments. It can also be used with Optima® 3x00 RL ICP-OES series instruments. The MicroMist™ micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. MicroMist™s for ELAN/NexION 300/350 are fitted with a UniFit connector with 1.3 O.D. X 0.50 mm I.D. x 700 mm long sample tubing.
This Insert/Venturi O-ring, with 4.4 mm I.D., is for use with AAnalyst 100/200/300/400/700/800 AA series instruments. It is designed for use in Metal Body nebulizers where each nebulizer requires 2 o-rings.
This PEEK nut is compatible with GemTip Cross-Flow II Nebulizers for use in Optima® 2x00/4x00/5x00/7x00 DV series, Optima® 8x00 and Avio® 200/500 ICP-OES series instruments.
This EzyFit Connector is for use with MicroMist and SeaSpray nebulizers in Optima® 4x00/5x00/7x00/8x00 and Avio® 200/500 ICP-OES series instruments in addition to ELAN® 5000/6x00/9000/DRCs and NexION® 300/350/1000/2000 ICP-MS series instruments. This product serves as a replacement connector and sample tubing for glass concentric nebulizers with EzyFit sample inlet. It is 700 mm long and includes 10 connectors.