Nebulizers

This Sample Capillary is for designed for use with MicroFlow^™ ST Nebulizers in PerkinElmer ICP-OES and ICP-MS instruments. This capillary serves as replacement part in MicroFlow PFA-ST, PolyPro-ST, and PFA-ST3 nebulizers only.

This concentric SeaSpray^™™ Quartz Nebulizer, with 1.0 L/min Argon flow rate and 1 mL/min uptake rate, is for use with ELAN^® 5000/6x00/9000/DRCs and NexION^® 300/350 ICP-MS series instruments. It is ideal for samples with high dissolved solids and offers outstanding nebulization efficiency for trace level analysis. It offers freedom from clogging while nebulizing solutions near the limit of solubility of most mineral salts and conferring significant sensitivity gains.

This PFA MicroFlow^™ Nebulizer with Integrated Autosampler Probe is for Avio^® and Optima^® ICP-OES series instruments, as well as NexION^® 300/350 ICP-MS series instruments. These nebulizers self-aspirate at low flow rates with any autosampler and provide the same benefits of the PFA MicroFlow nebulizer. MicroFlow^™ nebulizers are resistant to clogging, reliably self-aspirated or pumped to produce a fine aerosol for high transport efficiency and high sensitivity. The integrated sampling probe is constructed by encapsulating a rigid support material between layers of PFA to provide a chemically-resistant probe that is mechanically stable and resilient.

NexION 1000/2000 SMARTintro sample introduction solutions are tested as a complete unit to ensure intra- and inter-laboratory performance. Each system utilizes specific combinations of sample introduction components and the kits are color-coded according to the application of the user.

This UniFit Connector is designed for use with concentric glass nebulizers in Optima^® 4x00/5x00/7x00/8x00 and Avio^® 200/500 ICP-OES series instruments in addition to ELAN^® 5000/6x00/9000/DRCs and NexION^® 300/350/1000/2000 ICP-MS series instruments. The UniFit connector is a convenient drain connector for glass cyclonic spray chambers and is 700 mm long.

This PFA MicroFlow^™ Nebulizer with Integrated Autosampler Probe is for NexION 1000 and 2000 ICP-MS series instruments. These nebulizers self-aspirate at low flow rates with any autosampler and provide the same benefits of the PFA MicroFlow nebulizer. MicroFlow^™ nebulizers are resistant to clogging, reliably self-aspirated or pumped to produce a fine aerosol for high transport efficiency and high sensitivity. The integrated sampling probe is constructed by encapsulating a rigid support material between layers of PFA to provide a chemically-resistant probe that is mechanically stable and resilient.

This Sample Capillary is for designed for use with MicroFlow^™ ST Nebulizers in PerkinElmer ICP-OES and ICP-MS instruments. This capillary serves as replacement part in MicroFlow PFA-ST, PolyPro-ST, and PFA-ST3 nebulizers only.

This O-Ring, with 24.99 mm I.D. and 3.53 mm width, is a component of the Burner System for PinAAcle^® 500/900 and AAnalyst^® 100/200/300/400/700/800.

This PTFE nebulizer spacer is used with Avio^™ 200 and 500 ICP-OES series instruments.

This DuraMist^™ Direct Connection Nebulizer is for use with Avio^® 200/500 and Optima^® 4x00/5x00/7x00/8x00 ICP-OES series instruments. It has a UniFit sample connector which slides easily over the sample arm and an argon connector configured to connect directly to your ICP. This DuraMist^™ nebulizer also features an inert metal-free argon connector, instrument-specific Direct Connect flexible Argon line, and a reliable ratchet fitting that ensures leak-free gas connection. Includes Gas Fitting with ratchet connector (N0811308).

This PFA MicroFlow^™ Nebulizer with Integrated Autosampler Probe is for NexION 1000 and 2000 ICP-MS series instruments. These nebulizers self-aspirate at low flow rates with any autosampler and provide the same benefits of the PFA MicroFlow nebulizer. MicroFlow^™ nebulizers are resistant to clogging, reliably self-aspirated or pumped to produce a fine aerosol for high transport efficiency and high sensitivity. The integrated sampling probe is constructed by encapsulating a rigid support material between layers of PFA to provide a chemically-resistant probe that is mechanically stable and resilient.

This UniFit Connector is designed for use with concentric glass nebulizers in Optima^® 4x00/5x00/7x00/8x00 and Avio^® 200/500 ICP-OES series instruments in addition to ELAN^® 5000/6x00/9000/DRCs and NexION^® 300/350/1000/2000 ICP-MS series instruments. The UniFit connector is a convenient drain connector for glass cyclonic spray chambers and is 700 mm long.

This PTFE Tubing is for use with Avio^® 200/500 and Optima^® 2x00/4x00/5x00/7x00/8x00 ICP-OES series instruments, NexION^® 1000/2000 ICP-MS series instruments, and AAnalyst 100/300/200/400/700/800 AA series instruments. It is designed for use with GemTip and GemCone nebulizers.

This PFA 100 µL/min MicroFlow nebulizer, with integrated fluoropolymer capillaries, is used with NexION^® 2000 and 1000 ICP-MS series instruments.

This Geological Sample Introduction Kit is used with NexION 1000 and 2000 ICP-MS series instruments. NexION 1000/2000 SMARTintro sample introduction solutions are tested as a complete unit to ensure intra- and inter laboratory performance. Each system utilizes specific combinations of sample introduction components and the kits are color-coded according to the application of the user.

This Capillary Tubing is designed for use with MiraMist and AriMist nebulizers in Optima^® 4x00/5x00/7x00/8x00 and Avio^® 200/500 ICP-OES series instruments.

This UniFit-EzyFit Sample Tube is for use with MicroMist^™ and SeaSpray^™ nebulizers in Optima^® 4x00/5x00/7x00/8x00 and Avio^® 200/500 ICP-OES series instruments in addition to ELAN^® 5000/6x00/9000/DRCs and NexION^® 300/350/1000/2000 ICP-MS series instruments. It includes 6 sample tubes.

This Drain Fitting is designed for use with Cyclonic Spray Chambers in PerkinElmer ICP-MS instruments. Included is a 9 inch PFA capillary with 0.76 mm I.D. and 1.57 mm O.D.

This Slurry Direct Connection Nebulizer is for use with Avio^® 200/500 and Optima^® 4x00/5x00/7x00/8x00 ICP-OES series instruments. It has a UniFit sample connector which slides easily over the sample arm and an argon connector configured to connect directly to your ICP. This Slurry nebulizer also features an inert metal-free argon connector, instrument-specific Direct Connect flexible Argon line, and a reliable ratchet fitting that ensures leak-free gas connection.

This PFA OpalMist^™ Nebulizer is for use with Optima^® 4x00/5x00/7x00/8x00 and Avio^® 200/500 ICP-OES series instruments. it is recommended for high precision analyses requiring the highest chemical resistance of HF, alkalis and organics. The OpalMist^™ is also capable of aspirating high concentrations of dissolved solids without clogging. It is an ideal nebulizer to handle geochemical samples which are typically dissolved in HF and are high in dissolved solids.

This SeaSpray^™ Direct Connection Nebulizer is for use with Avio^® 200/500 and Optima^® 4x00/5x00/7x00/8x00 ICP-OES series instruments. It has a UniFit sample connector which slides easily over the sample arm and an argon connector configured to connect directly to your ICP. This SeaSpray^™ nebulizer also features an inert metal-free argon connector, instrument-specific Direct Connect flexible Argon line, and a reliable ratchet fitting that ensures leak-free gas connection. Includes Gas Fitting with ratchet connector (N0811308).

This PFA MicroFlow^™ Nebulizer with Integrated Autosampler Probe is for NexION 1000 and 2000 ICP-MS series instruments. These nebulizers self-aspirate at low flow rates with any autosampler and provide the same benefits of the PFA MicroFlow nebulizer. MicroFlow^™ nebulizers are resistant to clogging, reliably self-aspirated or pumped to produce a fine aerosol for high transport efficiency and high sensitivity. The integrated sampling probe is constructed by encapsulating a rigid support material between layers of PFA to provide a chemically-resistant probe that is mechanically stable and resilient.

This MicroFlow High Efficiency Nebulizer, with PFA gas line, is for NexION^® 1000/2000 ICP-MS series instruments. It is specially designed to convert liquid samples to aerosol at sample liquid flow rates as low as 10 μL/min while minimizing rupture of biological cells.

This Internal Standard Tee is for use with MEINHARD Plus Nebulizers.

This OpalMist^™ Nebulizer is used with ELAN^® 9000/5000/6x00/DRCs and NexION^® 300/350 ICP-MS series instruments. The OpalMist^™ is ideal for the geochemistry and semiconductor industry. It is suited for high precision analyses involving analyses requiring high chemical resistance to HF, alkalis and organics. It also provides excellent results for trace analyses.