Injectors

For Rheodyne Model 7010/7125 Injection Valves.

This Alumina Injector is used with Optima^® 4300V/5300V/7300V ICP-OES series instruments. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.

This Quartz Injector is used with ELAN^® and NexION^® 300/350 ICP-MS series instruments. It is designed for use with the HF-Resistant Sample Introduction System (WE024782).

This Injector Support Adapter Top Fitting is for use with Optima^® 4300V/5300V/7300V ICP-OES series instruments. It is compatible with only Cyclonic Spray Chambers.

This Injector Support Adapter Bottom Fitting is for use with Optima^® 4300V/5300V/7300V ICP-OES series instruments. It is compatible with only Cyclonic Spray Chambers.

This O-Ring Kit is for use with Injector Support Adapters in Optima^® 2x00/4x00/5x00/7x00 DV and 8x00 ICP-OES series instruments. It is compatible with the Standard Injector Support Adapter (N0770603) and the Injector Support Adapter for 1.2 mm I.D. Entire Length Injectors (N0776091).

This injector is designed for use with standard demountable torches in NexION^® 1000 and 2000 ICP-MS series instruments. The demountable design allows the injector to be removed and replaced efficiently without dismounting the torch. An injector light shield is also included to protect the torch and injector base from discoloration caused by the plasma.

This injector is compatible with the Demountable Quartz Torch - Black Mark (N8152379), Demountable UHP Quartz Torch - Gray Mark (N8152448), and the Demountable Organics Quartz Torch - Orange/Black Mark (N8152596) for NexION^® 1000/2000.

This Demountable Injector is for use with Optima^® 8x00 ICP-OES series instruments. It is designed for use with the quartz, organics and silicon nitride demountable ZipTorches. The demountable design allows the injector to be removed and replaced efficiently for cleaning without dismounting the torch.

This Ball Joint Injector is for use with ELAN^® and NexION^® 300/350 ICP-MS series instruments. It is designed for use with Pass-Through Ball Joint Injector Support Adapters (WE023951 or W1012406). Quartz injectors are ideal for volatile organic solvent introduction and recommended for a wide range of non-HF applications.

For use with Clarus 600 Series.

This Quartz Injector is used with ELAN^® and NexION^® 300/350 ICP-MS series instruments. It is designed for use with the HF-Resistant Sample Introduction System (WE024782) and the Glass Cyclonic Sample Introduction System for ELAN^® (N8120518).

For both the Series 200 Autosampler and manual injectors. Rotor seals should be replaced every 6 months-1 year.

This Injector Support Adapter is for use with ELAN^® DRCs ICP-MS series instruments. It is designed for Quartz Ball Joint Injectors.

For Rheodyne Model 7010 Injection Valves.

This Sapphire Injector is for use with Avio^® 200 and 500 ICP-OES series instruments. It is recommended for silicon, environmental, geochemistry, and various HF applications.

This Quartz Injector is for use with Avio^® 200 and 500 ICP-OES series instruments. They are designed for organic solvents and non-HF matrices.

This Sapphire Injector is for use with Optima^® 3000/3000 SCR/3x00 RL ICP-OES series instruments. Sapphire injectors are ideal for silicon applications