PerkinElmer

ICP-MS Consumables

OF

Each part is fit to perform and is manufactured with the highest quality materials available. Selection of the correct components can help speed your analyses, increase repeatability of results and minimize errors. Our precision designed products deliver the peace of mind that comes from knowing that you’ll get the results you need. Whether you are looking for sample introduction components or standards, we have the consumables you need to keep your ICP-MS up and running smoothly and efficiently. Choose from our variety of torches, nebulizers, spray chambers, injectors, cones, and autosampler supplies.

Cones

Our Cones are precision-designed and manufactured providing the best analytical results. We invest heavily in testing and validating our complete portfolio of products to ensure that you receive accurate, repeatable results, on-time, every time throughout the lifetime of your instrument. Large-orifice sampler and skimmer cones provide superior long-term stability and resist clogging, allowing analysis under both high and low sample-uptake conditions. Choose from Nickel and Platinum Cones.

Humidifiers

Argon Humidifiers are commonly used in ICP analyses involving samples with high concentrations of dissolved solids. It helps to alleviate salt deposits in the nebulizer and torch injector, allowing uninterrupted and maintenance-free operation.

Injectors

We offer a complete selection of injectors in various sizes and materials to meet all of your application needs. Choose from Alumina, Sapphire and Quartz injectors. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. Quartz injectors are designed for organic solvents and non-HF matrices. Sapphire injectors are ideal for silicon applications.

Nebulizers

We offer a complete selection of nebulizers in a variety of materials for all of your application needs. Selection of the correct components can help speed your analyses, increase repeatability of results and minimize errors. Not every sample introduction system is ideal for every application. Each combination has a unique advantage based on your particular sample needs. Choose from Concentric, MicroFlow, and GemClean nebulizers.

Sample Introduction Kits

We offer a selection of Sample Introduction Kits, Sample Introduction Modules, and Consumables Kits for your specific application needs. Not every sample introduction system is ideal for every application. Each combination has a unique advantage based on your particular sample needs. Each kit is designed for your instrument model for your convenience.

Spray Chambers

The spray chamber is an integral part of the sample introduction System. Selection of the correct components can help speed your analyses, increase repeatability of results and minimize errors. Each type of spray chamber has been tested to provide the best performance and analytical results. Not every sample introduction system is ideal for every application. Each combination has a unique advantage based on your particular sample needs. With more sampling and application options than ever before, let us work with you to best understand your laboratory requirements and recommend the best option. Choose from Baffled Cyclonic, Scott Spray and PFA Spray Chambers.

Torches

We carefully select the best materials that provide optimal performance. The right consumables, methods and application support are as integral to the success of your laboratory as your instrumentation. That’s why we invest heavily in testing and validating our complete portfolio of solutions to ensure that you receive accurate, repeatable results, on-time, every time throughout the lifetime of your instrument. Torches are specifically designed for your instrument. Trust the consumables engineered for your instruments. Choose from Demountable Quartz, Fixed, and D-Torches.
Products & Services (245)
Filters:
Product Type
  • Accessories (15)
  • Consumables (230)
Product Brand Name
  • Asperon (1)
  • D-Torch (3)
  • DuraMist (2)
  • ESI (5)
  • GemCone (1)
  • GemTip (4)
  • MEINHARD (22)
  • MicroFlow (29)
  • MicroFlow-ST (7)
  • MicroMist (10)
  • Peltier (5)
  • pergo (7)
  • SeaSpray (6)
  • Teledyne CETAC (1)
  • Tracey (1)
Material
  • Carbon Fiber (10)
  • Ceramic (2)
  • CTFE (6)
  • Glass (19)
  • Nickel (3)
  • PEEK (3)
  • PFA (41)
  • Platinum (4)
  • PTFE (6)
  • Quartz (43)
  • Ryton (1)
  • Sapphire (3)
  • SilQ (7)
  • Viton (4)
Inner Diameter
  • 0.25 mm (4)
  • 0.5 mm (6)
  • 0.85 mm (1)
  • 1.0 mm (2)
  • 1.2 mm (1)
  • 1.5 mm (5)
  • 1.6 mm (2)
  • 1.8 mm (2)
  • 2.0 mm (6)
  • 2.5 mm (2)
Model Compatible With
  • Avio (1)
  • Avio 200 (51)
  • Avio 500 (51)
  • ELAN (1)
  • ELAN 5000 (67)
  • ELAN 6x00 (64)
  • ELAN 9000 (77)
  • ELAN DRC II (70)
  • ELAN DRC-e (75)
  • ELAN DRCs (3)
  • NexION (3)
  • NexION 1000 (116)
  • NexION 2000 (118)
  • NexION 300 (114)
  • NexION 350 (119)
  • NexION 5000 (3)
  • Optima (1)
  • Optima 2x00 DV (13)
  • Optima 3000 DV (1)
  • Optima 3000 SCR (1)
  • Optima 3000 XL (1)
  • Optima 3x00 DV (6)
  • Optima 3x00 RL (6)
  • Optima 4x00 DV (52)
  • Optima 5x00 DV (52)
  • Optima 7x00 DV (52)
  • Optima 8x00 (52)
  • SC-FAST (2)
Product Group
  • Adapters (8)
  • Adapters and Replacement Parts (8)
  • Autosampler Supplies,Probes (1)
  • Capillary Assemblies and Tubing (27)
  • Cleaning Tools (5)
  • Cooling Systems (1)
  • Detectors & Kits (2)
  • Drain Lines (1)
  • End Caps (1)
  • Ferrules (1)
  • Gas Lines and Tees (2)
  • Injectors (13)
  • Internal Standard Kits and Tees (2)
  • Ion Lenses & Tools (2)
  • Nebulizer Tips (1)
  • Nebulizers (55)
  • O-Rings (7)
  • O-Rings & Gaskets (2)
  • Outer Tubes (2)
  • Probes (4)
  • Removal Tools (1)
  • Replacement Parts (6)
  • Safety Shields (1)
  • Sample Introduction Kits (11)
  • Sampler Cones (4)
  • Screws (1)
  • ShadowStops (1)
  • Skimmer Cones (3)
  • Spray Chambers (18)
  • Temperature Controlled Spray Chambers (5)
  • Torch Cassettes (5)
  • Torch Mounts (3)
  • Torch Replacement Parts (1)
  • Torch Tools (2)
  • Torches (13)
  • Tubing (1)
  • Valves and Adapters (3)
Style
  • 0-Slot (11)
Technology Type
  • AA (1)
  • ICP-MS (53)
  • ICP-OES (51)
Type
  • Baffled and Cyclonic (12)
  • Barrel (3)
  • Scott (2)
Detector Type
  • ICP-MS (1)

Sort by

1-25 of 245 Products & Services

  • pergo 2 Argon high solids accessory w/o Nebulizer

    pergo 2 Humidifier with PFA-ST Nebulizer

    The pergo 2 Argon Humidifier is for use with ELAN® and NexION® ICP-MS series instruments. The pergo improves performance of all concentric nebulizers for the routine analysis of brines, fusion digests and other high-TDS samples. A high pressure membrane positioned inside a temperature-controlled water reservoir perfuses water vapor into the ICP nebulizer gas stream. By increasing humidity in the argon nebulizer gas, the pergo prevents salt deposits at the nebulizer tip, improving short and long-term signal stability. The pergo 2 is designed for analyses dealing with high concentrations of dissolved solids on instruments using auxiliary gas.
    List Price : 4136.00 USD
  • pergo 2 Argon high solids accessory w/o Nebulizer

    pergo 2 Humidifier with MEINHARD Plus Type C Nebulizer

    The pergo 2 Argon Humidifier is for use with ELAN® and NexION® ICP-MS series instruments. The pergo improves performance of all concentric nebulizers for the routine analysis of brines, fusion digests and other high-TDS samples. A high pressure membrane positioned inside a temperature-controlled water reservoir perfuses water vapor into the ICP nebulizer gas stream. By increasing humidity in the argon nebulizer gas, the pergo prevents salt deposits at the nebulizer tip, improving short and long-term signal stability. The pergo 2 is designed for analyses dealing with high concentrations of dissolved solids on instruments using auxiliary gas.
    List Price : 3029.00 USD
  • pergo 2 Argon high solids accessory w/o Nebulizer

    pergo 1 Humidifier with PFA-ST Nebulizer

    The pergo 1 Argon Humidifier is for use with Optima®, Avio®, ELAN®, and NexION® series instruments. The pergo improves performance of all concentric nebulizers for the routine analysis of brines, fusion digests and other high-TDS samples. A high pressure membrane positioned inside a temperature-controlled water reservoir perfuses water vapor into the ICP nebulizer gas stream. By increasing humidity in the argon nebulizer gas, the pergo prevents salt deposits at the nebulizer tip, improving short and long-term signal stability. Includes gas line connector kit.
    List Price : 4136.00 USD
  • DuraMist

    DuraMist Nebulizer 1.0 mL/min for ICP-MS

    This DuraMist Concentric Nebulizer is used with NexION® 1000 and 2000 ICP-MS series instruments. This nebulizer is an economical nebulizer for high precision analyses involving samples digested in HF.

    List Price : 1701.00 USD
  • N8150040

    SMARTintro Geological Sample Introduction Kit - Gold

    This Geological Sample Introduction Kit is used with NexION 1000 and 2000 ICP-MS series instruments. NexION 1000/2000 SMARTintro sample introduction solutions are tested as a complete unit to ensure intra- and inter laboratory performance. Each system utilizes specific combinations of sample introduction components and the kits are color-coded according to the application of the user.
    List Price : 11400.00 USD
  • N8151079 NexION Gas Connector

    1/8 Gas Fitting with Ratchet Nebulizer Connector

    This Gas Fitting with Ratchet Nebulizer Connector is for use with NexION® 1000/2000 ICP-MS series instruments. It is a Unifit style connector and is compatible with MicroMist and SeaSpray nebulizers.

    List Price : 228.00 USD
  • N8151076

    MicroMist Nebulizer, 0.1 mL/min

    This MicroMist Nebulizer is used with NexION® 1000 and 2000 ICP-MS series instruments. The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes.

    List Price : 1050.00 USD
  • N8151076

    MicroMist Nebulizer, 0.2 mL/min

    This MicroMist Nebulizer is used with NexION® 1000 and 2000 ICP-MS series instruments. The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes.

    List Price : 1050.00 USD
  • N8151076

    SeaSpray Quartz Nebulizer, 1.0 mL/min

    This SeaSpray nebulizer is used with NexION® 1000 and 2000 ICP-MS series instruments. The SeaSpray Concentric Nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization efficiency for trace level analysis. It offers freedom from clogging while nebulizing solutions near the limit of solubility of most mineral salts and conferring significant sensitivity gains. All SeaSpray Nebulizers are supplied with the EzyLok Argon connector.

    List Price : 1506.00 USD
  • N8151076

    SeaSpray Nebulizer, 2.0 mL/min

    This SeaSpray nebulizer is used with NexION® 1000 and 2000 ICP-MS series instruments. The SeaSpray Concentric Nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization efficiency for trace level analysis. It offers freedom from clogging while nebulizing solutions near the limit of solubility of most mineral salts and conferring significant sensitivity gains. All SeaSpray Nebulizers are supplied with the EzyLok Argon connector.

    List Price : 1250.00 USD
  • N8151076

    SeaSpray Nebulizer, 0.4 mL/min

    This SeaSpray nebulizer is used with NexION® 1000 and 2000 ICP-MS series instruments. The SeaSpray Concentric Nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization efficiency for trace level analysis. It offers freedom from clogging while nebulizing solutions near the limit of solubility of most mineral salts and conferring significant sensitivity gains. All SeaSpray Nebulizers are supplied with the EzyLok Argon connector.

    List Price : 1299.00 USD
  • PerkinElmer

    Fixed 1.0 mm Injector UHP Quartz Torch (White/White/White)

    One Piece Ultra Pure Quartz Torch with 1.0 mm Injector, PVDF O-Ring Free Holder.
    List Price : 942.00 USD
  • N8150446

    PC3X Thermally Stabilized Inlet System with PFA Nebulizer and Spray Chamber for NexION 1000/2000

    This PC3X Thermally Stabilized Inlet System is for use with NexION® 1000/2000 ICP-MS series instruments. It includes PFA-ST3 Nebulizer (N8152378) and High Performance PFA Spray Chamber with End Cap (N8150454). The PC3x for the High Performance PFA spray chamber is a compact, Peltier heated or cooled inlet system that offers the advantages of low memory effects, constant temperature, rapid wash-out and high sample transport efficiency. In cooling mode the PC3x cools the outer walls of the chamber, reducing the water or solvent vapor loading on the plasma, achieving enhanced stability and performance. In heating mode, sensitivity can be improved for low flow applications.

  • PerkinElmer

    PTFE Flame Sampling Probe Assembly with Carbon Fiber Support and Male Screw Fitting, 0.55 mm ID for AA/ICP/ICPMS

    For ICP/ICPMS requires but does not include N8145018*. For AA with a stainless steel nebulizer, the male connect should be removed so that tubing can be directly connected to the nebulizer, no additional tubing is required.
    List Price : 589.00 USD
  • PFA MicroFlow Nebulizer for NexION

    PFA MicroFlow Nebulizer with Integrated Capillary, 400 μL/min

    This PFA 400 µL/min MicroFlow nebulizer, with integrated fluoropolymer capillaries, is used with NexION® 2000 and 1000 ICP-MS series instruments.
    List Price : 2284.00 USD
  • PFA MicroFlow Nebulizer for NexION

    PFA MicroFlow Nebulizer with Integrated Capillary, 200 μL/min

    This PFA 200 µL/min MicroFlow nebulizer, with integrated fluoropolymer capillaries, is used with NexION® 2000 and 1000 ICP-MS series instruments.
    List Price : 2398.00 USD
  • PerkinElmer

    Cyclonic Spray Chamber Adapter

    This is a replacement part for the Baffled Cyclonic Spray Chamber.
    List Price : 118.00 USD
  • NexION 2000 Cassette Only (Purple)

    Torch Cassette, Purple - Cassette Only

    Purple cassette for NexION® 1000 ICP-MS configuration.
    List Price : 962.00 USD
  • PerkinElmer

    PTFE Flame Sampling Probe Assembly

    This product comes with Carbon Fiber Support and Male Screw Fitting, 1.0 mm ID for FIAS. Be sure to keep spare ferrules on hand (N8145237) Qty. 10.
    List Price : 596.00 USD
  • N8157042

    Torch Alignment Tool for NexION 1000/2000

    This torch alignment tool is used with NexION® 1000, 2000, and 5000 ICP-MS series instruments.
    List Price : 44.00 USD
  • PFA MicroFlow Nebulizer for NexION

    PFA MicroFlow Nebulizer with Integrated Capillary, 100 μL/min

    This PFA 100 µL/min MicroFlow nebulizer, with integrated fluoropolymer capillaries, is used with NexION® 2000 and 1000 ICP-MS series instruments.
    List Price : 2416.00 USD
  • PerkinElmer

    Argon Matrix Gas Line for NexION 300/350

    For Gas Dilution of High TDS Samples. This product is a Spray Chamber Replacement part.
    List Price : 275.00 USD
  • PFA Barrel Spray Chamber with Additional Gas Port

    PFA Barrel Spray Chamber with Additional Gas Port for NexION 1000/2000

    This PFA barrel spray chamber, with an additional gas port and 1/4-28 fitting, is used with NexION® 1000 and 2000 ICP-MS series instruments. The spray chamber is designed for high purity applications.
    List Price : 2907.00 USD
  • SMARTintro Sample Introuction Module Green 2.5 mm Quartz Torch

    SMARTintro Sample Introduction Module, Green, with One-Piece 2.5 mm I.D. Quartz Torch-Injector

    This SMARTintro torch module, with a one-piece 2.5 mm I.D. Quartz Torch-Injector, is used for NexION® 1000 and 2000 ICP-MS series instruments.
    List Price : 2167.00 USD
  • SMARTintro Sample Introuction Module Blue 2.0 mm Quartz Torch

    SMARTintro Sample Introduction Module, Blue, with One-Piece 2.0 mm I.D. Quartz Torch-Injector

    This SMARTintro torch module, with a one-piece 2.0 mm I.D. Quartz Torch-Injector, is used for NexION® 1000 and 2000 ICP-MS series instruments.
    List Price : 2275.00 USD
  • Jump to:
Resource Library (3)
Filters:
Events

Sort by

1-1 of 1 Resource Library