1-25 of 26 Products & Services
The PYRIS LN2 Dewar is a stainless steel vessel, 18 inches in diameter, 38 inches high, and about 95 lbs. This dewar has a operating range (under He purge) of -170° to 300°C. This dewar is compatible with the DSC 6000 with Autosampler, DSC 8000, and the Diamond/Jade DSC with Autosampler.
This Hot Stage Accessory runs on 100-120 V, 60 Hz. The accessory consists of a heating block and a temperature controller that can heat samples up to 230°C in 1°C increments. The hot stage accepts FT-IR cell windows. It attaches to PerkinElmer Spotlight systems via the slide clip on the instrument's sample stage.
The LN2 Cold Finger Accessory is a solid aluminum cylinder, 2.94 inches in diameter with 16 insulated ribs, that is used to maintain sub ambient conditions for coolants from liquid nitrogen to ice water.
The Automatic Cryo Kit supplies a cryogenic valve that attaches to the AutoCryogenic port on the DMA 8000 analyzer and controls the flow of coolant through a coolant line.
The PYRIS LN2 Feed Tube is a vacuum-jacketed and super-insulated flexible transfer line with a stainless steel braided and welded exterior. It has an outer diameter of 0.125 in, an inner diameter of 0.101 in, and is 6 ft long.
Electronic Humidity Sensor Kit includes an optional sensor to monitor the moisture levels on the internal optics of spectrometers. It alerts users when it is time to change a spectrometer's dessicant packs. Recommended for humid climates.
The Humidity Generator Calibrated Sensor Assembly is an accessory to the Humidity Generator (N5330400/N5330411). With this part number, you can order a sensor as a replacement or spare.
The Intracooler Insulated Bolt Kit is a spares kit of intracooler connection parts that link PerkinElmer intracoolers to DSC analyzers. This kit includes an insulating disk, split bushing, and a bolt. This kit ships standard with the PYRIS Cooling Accessory Kit.
The Liquid Nitrogen Cryo Dewar is a double-walled container through which a coolant, e.g. liquid nitrogen, flows to expand the subambient operating range for the DMA 8000 to temperatures as low as -196°C. This dewar has a 50 L capacity and is optimal for more demanding cryogenic applications. It ships with an Automatic Cryo Kit (N5330259), and installation instructions.
This Hot Stage Accessory runs on 220-240 V, 50 Hz. The accessory consists of a heating block and a temperature controller that can heat samples up to 230°C in 1°C increments. The hot stage accepts FT-IR cell windows. It attaches to PerkinElmer Spotlight systems via the slide clip on the instrument's sample stage.
1-1 of 1 Business Insights