Heating & Cooling Systems

The DuraChill^® recirculating chiller provides cooling power for demanding applications and serves as an economical alternative to tap water cooling systems. Easy to use and maintain, it combines technological innovation with precise temperature control to deliver reliable heat removal for a wide variety of applications.

The DuraChill^® recirculating chiller provides cooling power for demanding applications and serves as an economical alternative to tap water cooling systems. Easy to use and maintain, it combines technological innovation with precise temperature control to deliver reliable heat removal for a wide variety of applications.

This Chiller Coolant Mix is designed for use with the PolyScience^® WhisperCool^™ Refrigerated Chiller in NexION and ELAN ICP-MS instruments. This coolant mix ships as a 1 Liter bottle.

This Chiller Coolant Mix is designed for use with the PolyScience^® WhisperCool^™ Refrigerated Chiller in Avio and Optima ICP-OES instruments. This coolant mix ships as 5 half-gallon bottles.

The DuraChill^® recirculating chiller provides cooling power for demanding applications and serves as an economical alternative to tap water cooling systems. Easy to use and maintain, it combines technological innovation with precise temperature control to deliver reliable heat removal for a wide variety of applications.

Replacement Air Filter for PolyScience Chillers used with Optima ICP-OES and Elan ICP-MS instruments.

This Replacement Air Filter is designed for use with the PolyScience^® WhisperCool^™ Refrigerated Chiller in ICP-MS and ICP-OES instruments. This 13 inch x 14 inch Air Filter with Frame is fully washable and removes quickly for easy cleaning.

This Circulatory Furnace Cooling System is for use with THGA Furnace Systems in AA instruments. It operates at 230 V, 50/60 Hz and provides constant flow rate, pressure and temperature.

The Humidity Generator Calibrated Sensor Assembly is an accessory to the Humidity Generator (N5330400/N5330411). With this part number, you can order a sensor as a replacement or spare.

The PYRIS LN₂ Feed Tube is a vacuum-jacketed and super-insulated flexible transfer line with a stainless steel braided and welded exterior. It has an outer diameter of 0.125 in, an inner diameter of 0.101 in, and is 6 ft long.

The PYRIS LN₂ Feed Tube is a vacuum-jacketed and super-insulated flexible transfer line with a stainless steel braided and welded exterior. It has an outer diameter of 0.125 in, an inner diameter of 0.101 in, and is 3 ft long. This line ships with the PYRIS LN₂ Accessory (N5370259).

This Hot Stage Accessory runs on 100-120 V, 60 Hz. The accessory consists of a heating block and a temperature controller that can heat samples up to 230°C in 1°C increments. The hot stage accepts FT-IR cell windows. It attaches to PerkinElmer Spotlight systems via the slide clip on the instrument's sample stage.

The Intracooler Insulated Bolt Kit is a spares kit of intracooler connection parts that link PerkinElmer intracoolers to DSC analyzers. This kit includes an insulating disk, split bushing, and a bolt. This kit ships standard with the PYRIS Cooling Accessory Kit.

The LN₂ Cold Finger Accessory is a solid aluminum cylinder, 2.94 inches in diameter with 16 insulated ribs, that is used to maintain sub ambient conditions for coolants from liquid nitrogen to ice water.

Electronic Humidity Sensor Kit includes an optional sensor to monitor the moisture levels on the internal optics of spectrometers. It alerts users when it is time to change a spectrometer's dessicant packs. Recommended for humid climates.

The PYRIS LN₂ Dewar is a stainless steel vessel, 18 inches in diameter, 38 inches high, and about 95 lbs. This dewar has a operating range (under He purge) of -170° to 300°C. This dewar is compatible with the DSC 6000 with Autosampler, DSC 8000, and the Diamond/Jade DSC with Autosampler.

The Liquid Nitrogen Cryo Dewar is a double-walled container through which a coolant, e.g. liquid nitrogen, flows to expand the subambient operating range for the DMA 8000 to temperatures as low as -196°C. This dewar has a 50 L capacity and is optimal for more demanding cryogenic applications. It ships with an Automatic Cryo Kit (N5330259), and installation instructions.

The Automatic Cryo Kit supplies a cryogenic valve that attaches to the AutoCryogenic port on the DMA 8000 analyzer and controls the flow of coolant through a coolant line.

Intracooler designed for use with PerkinElmer Differential Scanning Calorimeters.

This Hot Stage Accessory runs on 220-240 V, 50 Hz. The accessory consists of a heating block and a temperature controller that can heat samples up to 230°C in 1°C increments. The hot stage accepts FT-IR cell windows. It attaches to PerkinElmer Spotlight systems via the slide clip on the instrument's sample stage.