Gas Management

For use with the Portable Electronic Gas Leak Detector (N9306089).

Includes tubing in multiple sizes.

Ideally suited for chromatographic carrier gas applications including FID, TCD, ECD, HID, and non-corrosive gas mixtures for analytical instrumentation.

This Dual-Stage High Purity Regulator is used with NexION 2000 ICP-MS series instruments. High-purity brass regulators are designed for use with analytical applications with non-corrosive gases. This regulator features a stainless steel diaphragm and a delivery pressure range of 0-50 psig. Dual Stage regulators will maintain a more constant outlet pressure - even as the pressure in the cylinder declines. So, if your application is one where gas flow is on for long periods, and pressure changes are not desirable - then you should choose a dual stage regulator.

Includes tubing in multiple sizes.

For measuring flow rates from 0.5 mL/min to 500 mL/min.

For use with the Portable Electronic Gas Leak Detector (N9306089).

This Dual-Stage High Purity Regulator is used with NexION 2000 ICP-MS series instruments. High-purity brass regulators are designed for use with analytical applications with non-corrosive gases. This regulator features a stainless steel diaphragm and a delivery pressure range of 0-50 psig.

This Dual-Stage Regulator is used with NexION 2000 ICP-MS series instruments. This regulator features a stainless steel diaphragm and barstock, as well as a delivery pressure range of 0-30 psig and CGA 660 fitting.. Dual Stage regulators will maintain a more constant outlet pressure - even as the pressure in the cylinder declines. So, if your application is one where gas flow is on for long periods, and pressure changes are not desirable - then you should choose a dual stage regulator.

CGA-350 fitting.

CGA-350 fitting.

Supplied with 590-580 Adapter.

Shipped in a plastic tool box for convenient storage.

This Methane Regulator is for use with ICP-MS instruments. It is designed for general purpose, noncorrosive gas service and are recommended for use where constant delivery pressure is desired. It features a brass body and Neoprene diaphragm, as well as a maximum inlet pressure of 3000 psig.

CGA-580 fitting.

The Regulator Install Kit makes it possible to set up a single source gas delivery system (instead of using two gas cylinders, one source and one purge gas) by installing a series of gauges off the regulator on the source gas.

• Copper tubing, 6 ft long with an inner diameter of 1/8 in., Qty. 2
• Male brass tubing connector, 1/4 NPT to 1/8, Qty. 2
• Male brass tubing connector, 1/4 NPT to 1/8, Qty. 2
• PTFE^® tape, Qty. 1 role