Fittings, Ferrules & Connectors

Standoff is 0.75 inches long with a 0.25 inch diameter, 6-32 thread size, and has a round cross section.

Includes 6 nuts and 6 ferrules.

Package includes five O-Rings.

For use with Swagelok^® tube fittings.

For use with Swagelok^® tube fittings.

Single ferrule compression fitting provides a leak-tight seal.

For 1/16 inch female Swagelok^® tube fittings.

Not recommended for use with aluminum-clad columns.

For use at injector temperatures up to 250°C. Recommended for use with GC/MS systems.

Recommended for high-temperature applications up to 450 °C. Not for GC/MS.

Recommended for high temperature applications, up to 450 °C.

For use with Swagelok^® fittings.

General purpose 300 series ferrule for GC/gas lines.

Short, 2 hole ferrules for use with the Clarus 590/690 Capillary Injector at temperatures up to 350°C.

For use on Valco^™ valve.

For use with fused silica GC/MS connections.

Recommended for first-time LC purchasers.

This PEEK nut is compatible with GemTip Cross-Flow II Nebulizers for use in Optima^® 2x00/4x00/5x00/7x00 DV series, Optima^® 8x00 and Avio^® 200/500 ICP-OES series instruments.

Compatible with Atomic Absorption (AA) sample introduction systems such as the AS-40/60/70/71/72/800/900 graphite furnace autosamplers and the AutoPrep 50 dilution accessory.

This Ferrule is designed for use in GemTip Cross-Flow II Nebulizers in Optima^® 2x00/4x00/5x00/7x00/8x00 and Avio^® 200/500 ICP-OES series instruments.

Recommended for high-temperature applications up to 450 °C. Not for GC/MS.

10-32 thread size. Includes O-ring seal.

For use with Tefzel Reverse Ferrules (09903771).