Detectors

Series II Ion Lens for ELAN^® 6x00, 9000, DCR-e, and DRC II ICP-MS series instruments manufactured between January 1998 and April 2005.

Replacement Cassette Lens ShadowStop^™ for ELAN^® 9000, DRC-e, and DRC II ICP-MS series instruments manufactured after April 2005.

The dual -stage detector is an integral part of the NexION ICP-MS SimulScan^™ system. This discrete dynode electron multiplier measures both high- and low-level analytes simultaneously.

Replacement glow plug for Gas Chromatorgaphy with Flame Ionization Detector (FID).

The PID utilizes a high-intensity ultraviolet light source to ionize the sample components eluting from the column in order to generate the chromatographic signal.

The PID has a maximum recommended operating temperature of 250 °C. The lamp can be replaced with a blanking disk to allow bake-out operation (up to 350 °C). Kit includes: detector, heater, sensor, makeup gas needle valve, and all necessary mounting hardware for installation on a GC. Requires, but does not include, amplifier (N6120061) and lamp power supply (N6120062). Firmware revision 1.2 or greater is required. Firmware must be PerkinElmer Service installed. Improved selectivity for multiple ring aromatic, sulfur compounds.