PerkinElmer

AA Consumables

OF

We offer a wide selection of superior quality products designed to work with your PerkinElmer instruments. Our precision designed products deliver the peace of mind that comes from knowing that you’ll get the results you need. Choose from our variety of hollow cathode lamps, nebulizers, graphite furnace autosampler supplies, HGA & THGA graphite components, and flow injection system supplies.

Bulbs & Lamps

For both analytical or biological analyses, we provide the highest quality bulbs and lamps to help with your testing needs.
  • Bulbs: For the optimal performance from our high content imaging, digital pathology, and tissue imaging systems, we have the right bulbs for your instruments.
  • Lamps: From AA lamps, like single and multi-element hollow cathode (HCL) and electrodeless discharge (EDL), to LC and UV deuterium, tungsten, and xenon lamps, we have what you need to perform your analysis. Each lamp is designed to match the performance of your instrument and is tested to meet our high standards.

Flow Injection System Supplies

We offer a complete line of genuine replacement parts for the FIAS, FIMS and MHS systems. Keeping your system in good working order by using only the best replacement parts is the first step in assuring quality analytical performance. Regular maintenance and/or replacement of consumables such as tubing, connectors and adapters will maximize the lifetime and productivity of your flow injection system.

Graphite Tubes

The production of high-quality graphite components requires stringent quality control. To ensure high quality and consistency, a specific grade of high-density base graphite material has been developed for PerkinElmer’s exclusive use. This base graphite material is used for the manufacturing of all PerkinElmer graphite tubes. Selection and careful control of raw materials are extremely important. The composition and the microstructure of the base graphite material determine the specific resistivity of the tube and its heating characteristics. When you purchase graphite supplies from PerkinElmer, you get the results of our many years of experience with quality graphite parts.

Nebulizers

All of our nebulizer assemblies are adjustable for optimized performance and include easily-interchanged capillary assemblies for simple, reduced-cost maintenance. Our nebulizers are manufactured to exacting tolerances to provide maximum sensitivity. Universal, or, ‘standard’ nebulizers are less expensive than the corresponding high-sensitivity nebulizers and provide a lower level of sensitivity. The universal, or, ‘standard’ nebulizers typically provide better precision and reduced ‘carryover’ interference when used with solutions that contain high dissolved solids content of higher analyte concentrations.

Sample Cups

Graphite furnace sample cups are of heavy-duty construction to prevent cracking or tipping. Their conical design allows for use of nearly the entire sample. With a diverse choice of materials, we have every solution your labaratory may need.
Products & Services (154)
Filters:
Product Type
  • Accessories (8)
  • Consumables (146)
Product Brand Name
  • EDL (2)
  • Lumina (53)
  • Multivendor (31)
  • PerkinElmer (22)
  • System 2 (1)
Color
  • Black/Black/Black (1)
  • Black/White/Black (1)
  • Purple/Purple/Purple (1)
  • Red/Red/Red (1)
  • White/White/White (1)
  • Yellow/Blue/Yellow (1)
Material
  • ETFE (2)
  • Polyethylene (1)
  • Polypropylene (6)
  • Polystyrene (2)
  • PTFE (2)
  • PVC (2)
  • Silicone (1)
  • Viton (1)
Volume Capacity
  • 1.2 mL (1)
  • 1.5 mL (1)
  • 1000 µL (1)
  • 2 mL (2)
  • 2.5 mL (1)
  • 200 µL (1)
  • 25 mL (1)
  • 3.5 mL (1)
  • 30 mL (1)
  • 500 µL (1)
  • 7 mL (1)
Inner Diameter
  • 0.76 mm (1)
  • 1.02 mm (1)
  • 1.14 mm (1)
  • 1.52 mm (1)
  • 2.06 mm (1)
  • 2.4 mm (3)
  • 3.18 mm (1)
  • 5 mm (1)
Model Compatible With
  • AAnalyst (53)
  • AAnalyst 100 (1)
  • AAnalyst 200 (1)
  • AAnalyst 300 (1)
  • AAnalyst 400 (1)
  • AS-60 (1)
  • AS-70 (1)
  • AS-71 (2)
  • AS-72 (2)
  • AS-800 (7)
  • AS-900 (7)
  • Avio 200 (1)
  • Avio 500 (1)
  • PinAAcle (52)
  • PinAAcle 500 (3)
  • PinAAcle 900 (2)
  • PinAAcle 900F (2)
  • PinAAcle 900H (2)
  • PinAAcle 900T (2)
Number of Elements
  • Multiple (13)
  • Single (42)
Outer Diameter
  • 2 in (53)
Product Group
  • Accessory (2)
  • Adapters (1)
  • Bottles and Containers (2)
  • Burner Drain Assemblies (1)
  • Burner System Components (1)
  • Cells and Windows (6)
  • Connectors (4)
  • Cups (7)
  • Deuterium Lamp (1)
  • EDL Driver Assemblies and Components (3)
  • Ferrules (2)
  • Flow Injection Furnace Supplies (2)
  • Flow Injection Tubing (1)
  • Gas/Liquid Separators and Replacement Parts (7)
  • HGA Graphite Contact Cylinders (1)
  • HGA Graphite Tubes (4)
  • Hollow Cathode Lamp (HCL) (53)
  • Instrument Tools (2)
  • Nuts (1)
  • O-Rings (1)
  • Peristaltic Pump Tubing (1)
  • Probes (1)
  • Replacement Parts (2)
  • Sample Loops (3)
  • THGA Graphite Contact Cylinders (2)
  • THGA Graphite Tubes (1)
  • Tools and Replacement Parts (6)
  • Trays and Racks (1)
  • Tubing (1)
  • Valves and Adapters (1)
Style
  • Advanced Platform (2)
  • Back (1)
  • Front (1)
  • Integrated Platform (2)
  • L'vov Groove (1)
  • Partitioned (1)
  • Walled (1)
Technology Type
  • AA (17)
  • AA/ICP-OES (2)
  • Atomic Absorption (39)
  • ICP-MS (3)
  • ICP-OES (3)
Type
  • Peristaltic Pump (2)
  • Standard (9)
  • Standard Three-Stop (2)
  • UltraClean (1)

Sort by

1-25 of 154 Products & Services

  • PerkinElmer

    Check Valve Kit for AA Furnace Autosampler

    This check valve kit contains the inlet and outlet check valves for the furnace autosampler of PerkinElmer Atomic Absorption (AA) instruments. The check valves are designed to be used with aqueuos solutions only.
    List Price : 1276.00 USD
  • PerkinElmer

    Organics Burner Drain Assembly for PinAAcle and AAnalyst

    This is a Burner Drain Assembly for flame-equipped PinAAcle 500/900 and AAnalyst 100/200/300/400 Atomic Absorption (AA) instruments. The kit includes the complete drain assembly and a bottle. All components of the system was designed to be utilized with samples containing organic matrixes.
    List Price : 1702.00 USD
  • PerkinElmer

    Holder for PinAAcle AA Flame Burner Assembly

    The holder will support a full flame burner assembly for a PinAAcle AA instrument. Can be used to properly hold and store the flame burner assembly without damaging workbenches or burner system components.
    List Price : 401.00 USD
  • Torch O-Ring

    Viton O-Ring for Gas Lines (Neb., Aux., Fuel) of End Cap

    This Viton O-Ring is used in the end caps of PinAAcle 500 and 900 Atomic Absorption (AA) Flame instruments. It provides a seal for the nebulizer, auxiliary, and fuel lines that run between the end cap and the body of the burner chamber. A quantity of four (4) is required for each end cap.
    List Price : 5.00 USD
  • Polypropylene Disposable Sample Cups, 7.0 mL - Qty. 100

    These Polypropylene Sample Cups are for use with AS-800/AS-900 Graphite Furnace Autosampler. They are translucent and preferred for most solvents.

    List Price : 44.00 USD
  • Polypropylene Disposable Sample Cups, 2.5 mL - Qty. 1000

    These PTFE Sample Cups are for use with the AS-800/AS-900 Autosampler. They are translucent and preferred for most solvents.

    List Price : 100.00 USD
  • PerkinElmer

    Knurled Nut for 2.4 mm O.D. Tubing

    Compatible with Atomic Absorption (AA) sample introduction systems such as the AS-40/60/70/71/72/800/900 graphite furnace autosamplers and the AutoPrep 50 dilution accessory.

    List Price : 17.00 USD
  • PerkinElmer

    Back Ferrule for 2.4 mm O.D. Tubing

    Compatible with Atomic Absorption (AA) sample introduction systems such as the AS-40/60/70/71/72/800/900 graphite furnace autosamplers and the AutoPrep 50 dilution accessory.

    List Price : 19.00 USD
  • PerkinElmer

    Front Ferrule for 2.4 mm O.D. Tubing

    Compatible with Atomic Absorption (AA) sample introduction systems such as the AS-40/60/70/71/72/800/900 graphite furnace autosamplers and the AutoPrep 50 dilution accessory.

    List Price : 21.00 USD
  • Polypropylene Disposable Sample Cups, 1.2 mL - Qty. 2000

    These Polypropylene Sample Cups are for use with AS-71/72/800/900 Graphite Furnace Autosampler. They are translucent and preferred for most solvents.

    List Price : 149.00 USD
  • PerkinElmer

    Flow Injection Cell for FIAS

    This replacement part is for use with FIAS instruments. It includes the quartz window assembly without the quart cuvette cell. The complete FIAS Cell and Windows Kit (B0507486) is available separately.
    List Price : 254.00 USD
  • N9304631

    Agilent Zeeman Shroud

    The Zeeman Shroud for Agilent® is D25. 4/4x33 mm and comes in a quantity of 1. It is fit to perform on atomic absorption (AA) instruments for Agilent® and is equivalent to Agilent® part 63-100019-00.
    List Price : 78.00 USD
  • N9304634

    Agilent Zeeman Shroud GTA120, Pyrocoated

    The Zeeman Shroud GTA120 for Agilent® is pyrolytically coated with external gas and comes in a quantity of 1. It is fit to perform on atomic absorption (AA) instruments for Agilent® and is equivalent to Agilent® part 63-100036-00.
    List Price : 120.00 USD
  • N9304632

    Agilent Zeeman Electrode Contact for Older Instruments

    The Zeeman Electrode Contact for Agilent® is D20/4x22. 1 mm and is for use with older atomic absorption (AA) instruments. It is fit to perform on older Agilent® AA instrument models and is equivalent to Agilent® part 63-100017-00. The Zeeman Electrode Contact for Agilent® comes in a quantity of 2.
    List Price : 120.00 USD
  • N9304633

    Agilent Zeeman Electrode Contact for Newer Instruments

    The Zeeman Electrode Contact for Agilent® is for use with newer atomic absorption (AA) instruments and comes in a quantity of 2. It is fit to perform on Agilent® AA instrument and is equivalent to Agilent® part 63-100035-00.
    List Price : 224.00 USD
  • N9304629

    Agilent Shroud

    The Shroud for Agilent® is D25/9x30 mm and comes in a quantity of 1. It is fit to perform on atomic absorption (AA) instruments for Agilent® and is equivalent to Agilent® part 63-100018-00.
    List Price : 93.00 USD
  • N9304623

    Plateau Graphite Tube, Pyrolytically Coated for Agilent®, Pkg. 10

    Pyrolytically coated plateau graphite tube for Agilent atomic absorption instruments equipped with a graphite furnace. Packaged in a box of 10 tubes. Equivalent to Agilent 63-100011-00. Compatible with bone platform, N9304624.
    List Price : 532.00 USD
  • N9304626_N9304627

    Agilent Partition Graphite Tube, Uncoated

    The partition graphite tube for Agilent® is uncoated D6.9/3.9x24.9 mm and comes in a quantity of 10. It is fit to perform on atomic absorption (AA) instruments for Agilent® and is equivalent to Agilent® part 63-100015-00.
    List Price : 419.00 USD
  • N9304625

    Agilent Standard Graphite Tubes with Partition, Pkg. 10

    The partition graphite tube for Agilent® (formally Varian®) is pyrolytically coated and comes in a quantity of 10.

    List Price : 608.00 USD
  • N9304626_N9304627

    Agilent Partition Graphite Tube, Pyrolytically Coated with Extended Life

    The partition graphite tube for Agilent® is pyrolytically coated, D6. 9/3. 9x24. 9 mm and comes in a quantity of 10. It has an extended life and is fit to perform on atomic absorption (AA) instruments for Agilent®. The extended life partition graphite tube is equivalent to Agilent® part 63-100012-EL.
    List Price : 632.00 USD
  • N9304628

    Agilent Graphite Tubes with Omega Platform, Pkg. 10

    The omega-platform tube for Agilent® (formally Varian®) comes in a quantity of 10.

    List Price : 1149.00 USD
  • N9304630

    Agilent Electrode

    The Electrode for Agilent® is D20/5. 5x22. 3 mm and comes in a quantity of 2. It is fit to perform on Agilent® atomic absorption (AA) instruments and is equivalent to Aglient® part 63-100016-00.
    List Price : 168.00 USD
  • N9304624

    Bone Platform, Pyrolytic Graphite for Agilent®, Qty. 10

    Pyrolytically coated graphite bone platforms for Agilent plateau tubes (N9304623). Packaged in a box of 10 platforms. Equivalent to Agilent 63-100013-00.
    List Price : 266.00 USD
  • HGA Graphite Tubes

    HGA Graphite Walled Tubes

    Standard pyrocoated graphite walled tubes are produced in a quality controlled manner to ensure reliable temperature calibration in PerkinElmer graphite furnaces.

    Price Range : 366.00 USD - 2585.00 USD
  • UltraClean THGA Graphite Tubes with Integrated Platform

    UltraClean THGA Graphite Tubes with Integrated Platform

    For the most demanding analyses, PerkinElmer offers UltraClean THGA graphite tubes - delivering exceptionally low levels of contamination due to advanced high-temperature gas-phase cleaning procedures.

    Price Range : 1073.00 USD - 3634.00 USD
  • Jump to: