---------------------------------------
INSTALLATION NOTES VICTOR Nivo 3.0
---------------------------------------
!!!Important before updating the software!!!
Check whether a custom filter "620/10" is present in the filter list of your Nivo. If so, follow the steps below
before updating the software:
1. Unload the "620/10" filter and remove it from the VICTOR Nivo.
2. Delete the "620/10" filter from the filter list.

Update procedure:
1. Download and unzip the setup package SetupVICTORNivo3-0-X.zip.
2. Copy the setup file SetupVICTORNivo3-0-X.exe to the PC connected to the VICTOR Nivo.
3. Make sure that the VICTOR Nivo is switched on and connected to the PC (via LAN or WiFi).
4. Close the user interface (web browser).
5. Double-click the setup file and follow the VICTOR Nivo Setup Wizard. The update process is started.
   Do not switch off or disconnect the VICTOR Nivo while the update is running.
   Wait until the update is complete before proceeding.
6. Start your web browser* and clear the cache of your web browser:
	a. While in your browser, press Ctrl + Shift + Delete simultaneously to open the appropriate window.
	b. Select the check boxes "Cookies and other site data" and "Cached images and files" and click the "Clear Data" button.
7. Restart the VICTOR Nivo:
	a. Press and hold down the power button on the reader for at least 3 seconds until the light of the button goes out.
	b. Unplug the power cord for at least 10 seconds.
	c. Reconnect the power supply and switch on the reader.
8. Return to the PC and complete the VICTOR Nivo Setup Wizard:
	a. Confirm that you have cleared the browser cache and restarted the reader (select check boxes).
	b. Complete and finish the wizard.
9. Open the VICTOR Nivo software in your browser.
10. Read the Release Notes carefully to learn about the new features and improvements

*MS Internet Explorer is currently not supported