PerkinElmer

Sample Introduction Systems

OF

Accurate, repeatable results begin with flawless sample introduction. That's why we invest heavily in testing and validating our sample introduction accessories – to ensure you get the best possible results on time, every time, throughout the lifetime of your instrument. We offer a wide range of sample introduction systems for your analytical instrumentation, including:

  • UV sample introduction systems
  • IR sample introduction systems
  • Headspace sample introduction systems
  • And more

  • Products and Services

  • Resources, Events & More

Narrow your results
Product Type
  • Accessories (108)
  • Consumables (14)
  • Service Parts (6)
Material
  • AMTIR (6)
  • Coated ZnSe (2)
  • Diamond/ZnSe (1 Reflection) (6)
  • Diamond/ZnSe (3 Reflection) (4)
  • Diamond/ZnSe (9 Reflection) (5)
  • Ge (10)
  • Ge (1 Reflection) (3)
  • KRS-5 (2)
  • KRS-5 (1 Reflection) (3)
  • ZnSe (9)
Model Compatible With
  • Frontier (38)
  • LAMBDA 1050 (6)
  • LAMBDA 650 (6)
  • LAMBDA 750 (6)
  • LAMBDA 850 (6)
  • LAMBDA 950 (6)
  • NIRA II (3)
  • NIRM (3)
  • Spectrum 100 (26)
  • Spectrum 400 (26)
  • Spectrum 65 (25)
  • Spectrum BX/RX (1)
  • Spectrum GX (1)
  • Spectrum One (27)
  • Spectrum One/100/400/65/Frontier (1)
  • Spectrum Two (12)
Product Brand Name
  • Clarus (1)
  • Spectrum Two N (1)
Product Group
  • ATR Pressure Arm (1)
  • Clamp Assemblies and Replacement Parts (1)
  • Depolarizers (2)
  • Desolvation Accessory (6)
  • Diffuse Reflectance Accessory (2)
  • Fiber Optic Accessory (1)
  • Fixed Angle Accessory (1)
  • GladiATR Diamond (1)
  • HATR Accessory (9)
  • Heatable Transmission Accessory (1)
  • Imaging Accessory (1)
  • IR Specular Reflectance Set (1)
  • Light Shield (1)
  • Miracle Accessory (5)
  • NIR Accessory (3)
  • NIRM Accessory (1)
  • Optical Bench (5)
  • Polarization Accessory (1)
  • Polarizer (4)
  • Powder Press (1)
  • Pressure Gauge (1)
  • Sample Holder (1)
  • Sampling System (3)
  • Silver Gate (1)
  • Thermostatting Accessory (11)
  • Top Plate Accessory (3)
  • Top Plates (24)
  • Total Emission Accessory (1)
  • UATR Accessory (4)
  • UATR Polarization Accessory (2)
  • Variable Angle Accessory (1)
  • Variable-Angle Accessory (1)
  • Volatiles Cover (1)
Technology Type
  • ATR (53)
  • Diffuse Reflectance (9)
  • Fiber Optics (1)
  • Fluorescence Sampling (1)
  • FT-IR (1)
  • Specular Reflectance (3)

"Sample Introduction Systems" 1-50 of 128 Products and Services

Sort
Per Page
Spectrum Two N with NIRM accessory and optional Sample Spinner

100 mm Sample Spinner

The Sample Spinner for use with the Near-Infrared Reflectance Module (NIRM) and Near-Infrared Reflectance Accessory (NIRA II) provides representative sampling of non-homogenous samples.
Spectrum Two N HTM

Heatable Transmission Module (HTM) for Spectrum Two Platform

The Heatable Transmission Module (HTM) for the Spectrum Two platform (including both the Spectrum Two FT-IR and Spectrum Two N FT-NIR) allows for easy elevated temperature measurements on samples in the Mid-IR or Near-IR regions of the spectrum, the module accepting fixed pathlength sealed.
Water Jacketed Automatic Referencing Stage for LAMBDA 465

Water Jacketed Automatic Referencing Stage for LAMBDA 465

Accommodates any standard 10 mm cells 2-Position for reference and sample. Unique accessory provides long term stability for monitoring kinetics reactions. Use recirculating liquid to control the temperature of a sample and reference solution for simultaneous analysis.
PerkinElmer

Diffuse Reflectance Accessory for LAMBDA 465

Used for measuring the diffuse reflectance (SCE) and color analysis for solid and powder samples. It has a spectral range of 270~1000 nm (UV and Visible), and a port size of 10.00 and 5.00 mm (selectable). Included is a Xenon Lamp (150W), and a White Standard (1 each).
Spectrum Two N with NIRM accessory and optional Sample Vial Holder

Sample Vial Holder

The Sample Vial Holder for use with the Near-Infrared Reflectance Module (NIRM) and Near Infrared Reflectance Accessory (NIRA II) securely holds and aligns vials on the accessory window.
Near Infrared Reflectance Module (NIRM) for Spectrum Two N FT-NIR

Near Infrared Reflectance Module (NIRM) for Spectrum Two N FT-NIR

The Near Infrared Reflectance Module for the Spectrum Two N FT-NIR provides a convenient and sensitive method for analyzing opaque or highly scattering solid samples such as pharmaceuticals, food products, soap powders, coal, clay, soil, paper, painted surfaces, polymer foam, and catalysts.
Spectrum Two N with NIRM accessory and optional Sample Spinner

60 mm Sample Spinner

The Sample Spinner for use with the Near-Infrared Reflectance Module (NIRM) and Near-Infrared Reflectance Accessory (NIRA II) provides representative sampling of non-homogenous samples.
Fiber Coupling Module-Req./Not Inc.* for LAMBDA 365

Fiber Coupling Module-Req./Not Inc.* for LAMBDA 365

Fiber Optic Probe Module Only for L365. When combined with Fiber Optic Probe it can be used for measuring liquid samples; intended for hazardous samples.
PerkinElmer

Fiber Coupling Module-Req./ Inc.* for LAMBDA 465

Used for measuring liquid samples; intended for hazardous samples. Includes N4101048, a transmission dip probe and a 10 mm pathlength tip. Easy to clean.
Peltier Temperature Controller (without Cell) for LAMBDA 265

Peltier Temperature Controller (without Cell) for LAMBDA 465

Comes with internal liquid cooling system and N2 purge gas capability, magnetic stirrer control, and emergency power off switch.
8-Position Multicell Holder for LAMBDA 365

8-Position Multicell Holder for LAMBDA 365

Accommodates any standard 10 mm cells; up to 8 samples.
PerkinElmer

Peltier Control Multi-Cell (8) W/ Heated Ref for LAMBDA 465

Useful for thermal denaturation, kinetics, and other applications where precise temperature control is necessary. It accommodates up to 8 samples for automated measurement. Full software control of temperature and stirring, and a built- in radiator that maintains temperature of circulating coolant. Included is a Peltier controller, 8-position multi-cell holder (with heated reference) and 2 temperature probes. Can be configured to 7 sample + 1 heated reference.
Peltier Control Single Cell w/o Heat Ref for LAMBDA 465

Peltier Control Single Cell w/o Heat Ref for LAMBDA 465

This is useful for thermal denaturation, kinetics, and other applications where precise temperature control is necessary. Full software control of temperature and stirring for 1 sample. Included is a Peltier controller with single cell holder and 2 temperature probes.

Apex IR system for NexION

Apex IR system for PE NexION. Includes one PFA-100 with manual sampling probe, one PFA-ST nebulizer and adapter to NexION.
PerkinElmer

Rotating Sample Holder for Frontier NIRA

The Rotating Sample Holder for the Sample Compartment NIRA is designed to enhance reproducibility of measurements by enabling collection of a representative spectrum of an inhomogenous sample.

UATR Accessory for Spectrum One

The Universal ATR is an excellent general accessory for the analysis of solids and liquids, producing high quality spectra through the use of a pressure arm, allowing for good contact of the sample with the diamond/ZnSe crystal.
Fixed Angle Specular Reflectance Accessory

Fixed-Angle Specular Reflectance Accessory

The Fixed-Angle Specular Reflectance Accessory enables you to obtain a spectrum of any flat, reflecting surface on plate or sheet material. Includes Flat Reference Mirror and three Aperture masks (2 mm, 5 mm, and 10 mm).
PerkinElmer

Value HATR Accessory for Frontier, ZnSe Flat Top Plate

This Value HATR Accessory for the Frontier allows for excellent performance and simple samping of solids, polymer films, and powders.
PerkinElmer

ATR MIRacle for Spectrum BX/RX

A single reflection ATR accessory designed for the analysis of highly absorbing solid, semi-liquid and liquid samples. Easily changeable crystal plate design enables analysis of a broad spectrum of sample types while ensuring constant sampling pathlength.

Research Peltier Accessories : PTP-1, PTP-1+1, PTP-6 and PTP-6+6 accessories

For thermostatting of up to six 1cm cells in the sample beam, stirring possible. Temperature range 0° to 100 °C. Flexible programming of temperature ramps with up to 8 segments is possible. Requires, but does not include, Automatic Linear Transport for LAMBDA 1X/2X/3X/4X/Bio (B2000186) or Linear Cell Programmer for LAMBDA 6XX/8XX/9XX (B2205401). Also requires a water circulator(B0080171) or Peltier Controlled Fluid Circulator (N1015158)

Premium HATR Accessory for Spectrum One, ZnSe Trough Top Plate

This Premium HATR Accessory for the Spectrum One allows for superior performance and simple samping of liquids, powders, pastes, and gels.
PerkinElmer

Diffuse Reflectance Accessory for Spectrum One

The Diffuse Reflectance Accessory provides a convenient and sensitive method for analyzing opaque or highly scattering solid samples such as pharmaceuticals, food products, soap powders, coal, clay, soil, paper, painted surfaces, polymer foam and catalysts.
PerkinElmer

Light Shield

For use with N1016070 Fiber Optic Dip Probe.
PerkinElmer

Stirring Rods for PerkinElmer Lambda 10/20/40, Pkg. 15

Set of 15 pieces for stirring in the cuvette. For use with Research Peltier System - 6 Position (PTP-6), (L6310011) and 13-Cell Changer System (B0185210), and Magnetic Stirrer Accessory (B0507355).
PerkinElmer

Powder Press for Premium HATR Accessory

This Powder Press is for use with the PerkinElmer Premium HATR Accessory to allow for the compacting of soft powder samples to prepare for analysis by HATR.
PerkinElmer

ATR MIRacle for Spectrum One/100/400/65/Frontier

A single reflection ATR accessory designed for the analysis of highly absorbing solid, semi-liquid and liquid samples. Easily changeable crystal plate design enables analysis of a broad spectrum of sample types while ensuring constant sampling pathlength.

Premium HATR Trough Top Plate, 45° AMTIR

This Trough Top Plate features a 45° AMTIR (As/Se/Ge) crystal, for use with the PerkinElmer Premium HATR accessories.

Apex Q-FAST for NexION

Apex Q-FAST with integrated CTFE Fluoropolymer high-flow valve for PE NexION ICPMS, cassette torch mount. Includes one PFA-100 nebulizer, one PFA-ST nebulizer and adapter to NexION.
PerkinElmer

ATR MIRacle for Spectrum GX

A single reflection ATR accessory designed for the analysis of highly absorbing solid, semi-liquid and liquid samples. Easily changeable crystal plate design enables analysis of a broad spectrum of sample types while ensuring constant sampling pathlength.

NIRA Frontier

Near Infrared Reflectance Accessory (NIRA) for Frontier

The Near Infrared Reflectance Accessory (NIRA) is designed for diffuse reflectance measurements of light-scattering solids, liquids, and powders using the Frontier FT-NIR or FT-IR/NIR spectrometer.

Top Plates for UATR Accessory

We offer replacement top plates for use with the PerkinElmer Universal ATR accessory.
PerkinElmer

Film Polarizer for PerkinElmer Lambda 800/900 Double Polarizer Drive

High-performance film polarizer. One updates the double polarizer drive. For equal energy level in sample and reference beam, two are necessary, Product Number B0505530 and Product Number B0501282. Wavelength range: 400 to 700nm.
PerkinElmer

Universal ATR-1 Reflection Top-Plate for PerkinElmer Spectrum One FTIR

PerkinElmer Spectrum One Universal ATR Optional/Replacement Top-Plate
PerkinElmer

GladiATR diamond

Includes Gladiator base optics, monolithic diamond crystal plate, high pressure clamp with three interchangeable tips, liquids retainer with volatiles cover, purge tubes, purge kit, and spectrometer base mount.

Apex HF system for NexION

Apex HF system for the PE NexION 300. Includes one PFA-100 ST nebulizer and adapter to NexION.
PerkinElmer

Multiple Reflection HATR

Multiple Reflection HATR with ZnSe Trough and ZnSe Flat Plate includes HATR base optics, ZnSe trough plate, ZnSe flat plate, HATR pressure clamp, HATR powder press, volatiles cover, purge tubes, and spectrometer base mount.

Apex HF-FAST for NexION

Apex HF-FAST system with integrated CTFE Fluoropolymer high-flow valve for PE NexION ICPMS. Includes one PFA-100 nebulizer, one PFA-ST nebulizer and adapter to NexION. (NOTE: Requires SC-Autosampler with FAST enabled)
PerkinElmer

UATR Accessory for Frontier

The Universal ATR is an excellent general accessory for the analysis of solids and liquids, producing high quality spectra through the use of a pressure arm, allowing for good contact of the sample with the diamond/ZnSe crystal.

UATR Polarization Accessory for Frontier

The UATR Polarization Accessory is designed to provide reproducible, high quality ATR spectra of materials that polarize light through the use of a variable-angle polarizer mount.

"Sample Introduction Systems" 1-50 of 128 Products and Services

Per Page