PerkinElmer

Detectors

OF

From ICP-MS dual-stage detectors to gas chromatography Flame Photometric and Photoionization Detectors, we have high-quality dual-stage laboratory detectors for any application. Comes in three different models.

  • Products and Services

  • Resources, Events & More

Narrow your results
Product Type
  • Accessories (93)
  • Consumables (9)
  • Service Parts (7)
Product Brand Name
  • PerkinElmer (7)
Radioisotope
  • Ni-63 (2)
Model Compatible With
  • ELAN 6x00 (9)
  • ELAN 9000 (9)
  • ELAN DRCs (9)
  • NexION (2)
Product Group
  • Accessory (14)
  • Add-on Kit (32)
  • Bakeout Disk (1)
  • Detector Kit (5)
  • Ion Lens Tools (2)
  • Ion Lenses (3)
  • Replacement Part (42)
  • ShadowStops (2)
  • Upgrade Kit (1)
Technology Type
  • ICP-MS (8)
Type
  • ICP-MS (1)

"Detectors" 1-50 of 109 Products and Services

Sort
Per Page
ICP-MS_Detector

SimulScan Dual-Stage Detector for NexION 350/1000/2000

The dual -stage detector is an integral part of the NexION ICP-MS SimulScan system. This discrete dynode electron multiplier measures both high- and low-level analytes simultaneously.
PerkinElmer

Cassette Lens ShadowStop for ELAN 9000/DRCs (Post-2005)

Replacement Cassette Lens ShadowStop for ELAN® 9000, DRC-e, and DRC II ICP-MS series instruments manufactured after April 2005.
Series II Ion Lens for ELAN

Series II Ion Lens for ELAN 6x00/9000/DRCs (Post-1998)

Series II Ion Lens for ELAN® 6x00, 9000, DCR-e, and DRC II ICP-MS series instruments manufactured between January 1998 and April 2005.
PerkinElmer

Replacement Glow Plug

Replacement glow plug for Gas Chromatorgaphy with Flame Ionization Detector (FID).

Series II Ion Lens Removal Tool for ELAN 6x00/9000/DRCs (Post-1998/Pre-2005)

Flexible shaft driver with removable 2 mm Hex Ball Bit for use with ELAN® 6x00, 9000, DRC-e and DRC II ICP-MS series instruments manufactured between 1998 and 2005.
PerkinElmer

Auto-Ignite Flame Ionization Detector (FID) without PPC Add-On Kit for the PerkinElmer AutoSystem XL, 240V

Kit includes detector assembly with heater and sensor, heater block, igniter, hydrogen pressure regulator and needle valve. Requires but does not include amplifier (P/N N6120162). Requires PerkinElmer AutoSystem XL to have firmware revision 3.3 or higher. Note: PerkinElmer AutoSystem XL GO'S shipped prior to January 1997 require a new detector cover.
PerkinElmer

0.25mm (S.L.) Nar Band MCT Smpl Cpld IR

We offer 0.5 mm and 0.25 mm N/B MCT Detectors for GC/FTIR applications.
PerkinElmer

9.5 eV, PID Lamp, PID Replacement Parts

The PID utilizes a high-intensity ultraviolet light source to ionize the sample components eluting from the column in order to generate the chromatographic signal.

The PID has a maximum recommended operating temperature of 250 °C. The lamp can be replaced with a blanking disk to allow bake-out operation (up to 350 °C). Kit includes: detector, heater, sensor, makeup gas needle valve, and all necessary mounting hardware for installation on a GC. Requires, but does not include, amplifier (N6120061) and lamp power supply (N6120062). Firmware revision 1.2 or greater is required. Firmware must be PerkinElmer Service installed. Improved selectivity for multiple ring aromatic, sulfur compounds.

PerkinElmer

TCD/Flame Ionization Detector (FID) Series Operation Kit for PerkinElmer GCs

TCD/FID Series Operation Kit used to direct sample effluent from the TCD to the FID.

"Detectors" 1-50 of 109 Products and Services

Per Page