Dynamic Mechanical Analysis (DMA)


Accurately characterize the modulus, compliance, damping and other bulk properties of materials using our Dynamic Mechanical Analysis (DMA) solutions. Our state-of-the art instrumentation measures changes in rheological behavior under dynamic conditions as a function of temperature, time, frequency, stress, atmosphere, or a combination of these parameters. Applications and measurements include:

  • Stress-strain
  • Creep recovery
  • Thermomechanical
  • Moisture induced phase transitions
  • Moisture sensitive materials like paper, natural fibers, and food products
  • Swelling, shrinking and stiffness changes as humidity changes
  • Plasticizing and Tg effects as seen in nylon and polyurethanes

  • Products and Services

  • Resources, Events & More

Narrow your results
Product Type
  • Accessories (47)
  • Consumables (18)
  • Instruments (1)
  • Software and Informatics (1)
  • Aluminum (1)
  • Stainless Steel (1)
Maximum Temperature (Celsius)
  • Over 100 (1)
Model Compatible With
  • Diamond DMA (2)
  • Diamond TMA (1)
  • DMA 8000 (11)
Pipetting Arms
Product Group
  • Adapter Kits (1)
  • Air Dryer (1)
  • Bending Replacement Parts (2)
  • Book (1)
  • Capsule Kit (1)
  • Clamp Assemblies and Replacement Parts (2)
  • Cups (1)
  • DMA Assembly (1)
  • Flow Meter (1)
  • Forceps (2)
  • Gas Purge (1)
  • Gas Station (1)
  • Humidity Sensor (3)
  • Material Pockets (3)
  • Measuring Systems (1)
  • Mesh Pockets (2)
  • Microswitch Extension (1)
  • Pan Crimper (15)
  • Plates and Replacement Parts (3)
  • PMMA (1)
  • Probe Assembly (1)
  • Probes and Sample Tools (8)
  • Regulator (1)
  • Replacement Parts (1)
  • Sample Load Fixture (1)
  • Sample Pans (1)
  • Sample Tubes (1)
  • Spares Kits (1)
  • Starter Kit (5)
  • UV Lamps (1)
  • Thermal Analysis (1)
Technology Type
  • CHNO (2)
  • DSC (13)
  • EA (19)
  • Thermal Analysis (1)

"Dynamic Mechanical Analysis (DMA)" 1-50 of 67 Products and Services

DMA 8000 N5330101


The DMA 8000 is flexible and cost effective. Its innovative design, high functionality, and flexible operation make it ideal for advanced research and routine quality testing in the polymers, composites, pharmaceutical, and food industries.
List Price : 520.00 SEK
List Price : 1400.00 SEK

Standard Sample Pan Crimper Press

Used to crimp covers on standard DSC pans of aluminum, gold and copper. Design incorporates a replaceable crimper head.
List Price : 22500.00 SEK

PMMA for Diamond DMA, 0.2mm x 8mm x 40mm

Set of 10 for Tension Measuring System, Dimensions: 0. 2mm x 8mm x40mm,
List Price : 990.00 SEK
List Price : 1030.00 SEK
List Price : 16400.00 SEK
List Price : 1700.00 SEK
List Price : 5080.00 SEK

DMA 8000 Mesh Pockets (Set of 25)

For running pharmaceuticals, paints and other non supporting samples where letting moisture and solvent in and out is desirable.
List Price : 1420.00 SEK
List Price : 5920.00 SEK

Volatile Sealer Assembly

For use with volatile, viscous,noncorrosive samples.
List Price : 19700.00 SEK


Special problems often require special tools and a wide range of options exist for the DMA 8000.
List Price : 240.00 SEK

High Pressure Capsule Sealing Tool

This reliable sealing tool is fast and precise. It employs a built-in torque clutch which guarantees that all capsules are closed with the same torque.
List Price : 25200.00 SEK
List Price : 12700.00 SEK
List Price : 390.00 SEK

Non-Magnetic, Hooked Forceps

Non-Magnetic, Nonserrated Stainless Steel Straight Non-Magnetic, Hooked
List Price : 870.00 SEK

Thermal Analysis Gas Station for all Thermal Analyzers (controls up to four purge gases). For use with Pyris Series or 7 Series/UNIX software.

Thermal Analysis Gas StationUse the Thermal Analysis Gas Station (TAGS), a gas selector accessory with all thermal analyzers. The TAGS is a very flexible accessory featuring full control of all gases used in thermal analysis. In addition to performing gas switching, the TAGS also fully controls the gas flow rate, independent of the type of gas, and detects rapid changes in pressure and empty cylinders.
List Price : 72100.00 SEK

Universal DMA7/DMA 7e Probe Tip Holder for use with Stainless Steel Single and Dual Cantilever

Universal DMA7/DMA 7e Probe Tip Holder for use with Stainless Steel Parallel Plate, 2-, 3-, and 4-Point Bending. Single and Dual Cantilever Measuring systems. Includes probe tip holder (P/N N5390104), collet (P/N N5391004), and lock nut (P/N N5391005).
List Price : 4450.00 SEK

Quick Press Spacer Die

Included in the Large Volume Stainless Steel Capsule Kit (P/N 03190021).
List Price : 1810.00 SEK

Filter Dryer Kit

Filter Dryer Kit removes moisture and particulates from your purge gas. Includes all the necessary fittings needed to make pneumatic connections easy
List Price : 4660.00 SEK
List Price : 2320.00 SEK
List Price : 710.00 SEK
List Price : 4700.00 SEK
List Price : 440.00 SEK
List Price : 6760.00 SEK

Quartz 10 mm Bending Platform for DMA 7/DMA 7e 3-Point Bending Measuring System and TMA 7

This tube differs from the standard sample tube in that the 10mm bending platform is permanently fused to the base of the sample tube. Used with the high temperature furnace.
List Price : 4670.00 SEK
List Price : 20400.00 SEK

Quartz Sample Tube for Standard Furnace

Used with standard furnace, part of Quartz Parallel Plate SystemKit P/N N5390135.
List Price : 8740.00 SEK
List Price : 4780.00 SEK
List Price : 9070.00 SEK

Class 1.1 Calibrating Weight, 100 mg.

Class 1.1 Calibrating Weight (per ASTM E617,100 mg)
List Price : 6090.00 SEK

Sample Load Fixture for DMA 7/DMA 7e and TMA 7

Used to align and install sample into film sample clamps.
List Price : 7650.00 SEK
List Price : 3610.00 SEK

Manual Crimper

This sealer is capable of sealing both crimped pans and hermetic sealed pans . The die that is supplied can seal both of these, one side for crimped, the other for hermetic. Includes Hermetic Die N5356032 Stage N5356035 and Extruding Rod N5356033
List Price : 94300.00 SEK
List Price : 2760.00 SEK

Non-Magnetic, Nonserrated Stainless Steel Straight Forceps

Non-Magnetic, Nonserrated Stainless Steel Straight Non-Magnetic, Hooked
List Price : 770.00 SEK
List Price : 2320.00 SEK

Large Volume Stainless Steel Capsule Kit

This kit includes Quick Press (P/N 09908467), Quick Press Spacer Die (P/N 03191047), 1 Pair Guard Ring Inserts (P/N 03190236), and 20 Pans, Covers and O-Rings (P/N 03190218).
List Price : 24200.00 SEK

"Dynamic Mechanical Analysis (DMA)" 1-50 of 67 Products and Services