Loading . . .

Casting Inspection

Casting Inspection

X-ray inspection provides quality assurance for all types of cast parts. Typical casting flaws can occur in all casting techniques that involve materials such as iron, aluminium, magnesium or zinc. Even when the greatest care is taken, a major risk remains that externally unrecognizable casting flaws occur due to the complex interactions in the casting process. However, they can be easily identified using X-ray inspection.

Typical inspection tasks for cast parts include verification of blowholes and the formation of pores, blisters and thermal cracking; geometric measurement of inner structures; wall thickness analysis, dimensional changes and inclusions. Quality inspection using X-ray systems enables even high unit volumes to be checked for flaws rapidly and this way cast parts with a deviating casting structure can be easily identified and sorted out of the production process at an early stage. The possibility also exists to draw conclusions regarding casting quality from the types of flaws found, and then increase productivity by initiating appropriate measures.

Our FPDs enable our customers to optimize their casting X-ray inspection system with our special radiation-hardened detector design. Our NDT FPDs are capable of withstanding high radiation energies and dosages. They feature ultra-high contrast and image resolution, which allows you to detect even the most subtle micro-features and inconsistencies in cast parts.

Disclaimer Icon

PerkinElmer flat panel X-ray detectors are components intended to be integrated into products by X-ray systems manufacturers. Systems manufacturers are responsible for qualifying and validating their products for intended uses and meeting all applicable regulatory requirements.

Detectors

XRD 0822 AO, AP a-Si Flat Panel X-Ray Detector

0822

Our XRD 0822 Digital X-ray Flat Panel Detectors feature an 8-inch field of view and a 200 μm pixel pitch.

Dexela 1313 CMOS Flat Panel X-ray Detector

1313 (In Development)

Our Dexela 1313 has a pixel design that allows it to be used in 50 or 100 μm modes without losing image quality.

Dexela 1512 CMOS Flat Panel X-Ray Detector

1512NDT

The Dexela 1512NDT FPD features a 1944 × 1536 pixel matrix and a range of scintillator and interface options.

Dexela 2923NDT CMOS Flat Panel X-ray Detector

2923NDT

The Dexela 2923 FPD features a 3888 × 3072 pixel matrix and offers high speed and low noise.

XRD 1611 Wireless a-Si X-Ray Detector

1611 xP

Our XRD 1611 xP FPD features a 16-inch (41 cm) field of view and a 100 μm pixel pitch.

XRD 1620xN CN Wireless a-Si X-Ray Detector

1620 xN CS

Our XRD 1620 xN CS is part of our family of 16-inch (41 cm) Flat Panel X-ray Detectors (FPDs).

XRD 1621 a-Si Flat Panel X-Ray Detector

1621 xN

Our XRD 1621 xN Flat Panel X-ray Detector features a 16-inch (41 cm) field of view and a 200 μm pixel pitch.

XRD 1642 Wireless a-Si X-Ray Detector

1642 AP

Our XRD 1642 AP offers over 87 dB of dynamic range and frame rates up to 100 fps via multiple read-out modes.